MED036218CSENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: B
Certification N. MED036218CS
Certificate date 5/16/18
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a
USCG Category N° 164.112
Model or Denomin. LAMINATO CESAPLAST H.P.L. F.R.
Applicant CESAPLAST SPA
Place of requester VIA MATTEOTTI 1  %  20811 Cesano Maderno (MB)  % ITALY
Tel. N.,Fax, Email 0362/504701, 0362/524263, ---
Directive (EU) 2017/306
Dati Certificato F
Certification N. MED059018MI/002
Certificate date 11/10/2018
Mod. B Notified Body RINA (No. 0474)
Surveyor Rudolf Seiberl
Regulation and Standards IMO Res. MSC.307(88)-(2010 FTP Code),Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment


PRODUCT VERIFICATION (MODULE F)
CERTIFICATE No.  MED059018MI/002

This is to certify
that RINA Services S.p.A. did carry out appropriate examinations and tests in order to check the conformity of the equipment of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2018/773 and according to the type described in the EC Type Examination Certificate (Module B) below indicated.
Surveyor Rudolf Seiberl
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type LAMINATO CESAPLAST H.P.L. F.R.
Applicant CESAPLAST SPA
VIA MATTEOTTI 1,20811 Cesano Maderno (MB),ITALY
Module B certificate Number  MED036218CS
Date  May 16, 2018 
Date   RINA (No. 0474)
    
Issued in Milano 
On October 11, 2018

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE to affix the following symbol on the equipment verified by the Surveyor of RINA Services S.p.A. and specified in the Attachment to this Certificate.
0474 /18
 
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.112/EC0474/MED059018MI/002 to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
RINA Services S.p.A. - Paolo Chiappini
**** NOTICE: This is NOT an official certificate ****