FAB212822PU!001ENG- -  -  N- Steel forgings for machinery and semi-built & solid crankshafts -N- S- S- -30/01/2023- Fabbricanti Approvati- - NN- N- - S-  - 791,030BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB212822PU/001- N-Jan 9, 2028791030
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB212822PU/001 - (ENG)
Certificate date 30/01/2023
Type Approvazione di fabbricanti di materiali
Product Fucinati in acciaio

Model or Denomin.
Items
Steel forgings for machinery and semi-built & solid  crankshafts
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 09/01/2028
Head Office BUSAN
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB212822PU/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel forgings
Type Steel forgings for machinery and semi-built & solid  crankshafts
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 9, 2028
_________________________________
RINA Services S.p.A.
Cheol-Ho You
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB212822PU/001
Enclosure - Page 1 of 1
Steel forgings for machinery and semi-built & solid  crankshafts

APPROVAL CONDITIONS

Steel types: carbon, carbon - manganese and low alloy steels.

Steel making process : ingot casting.

Products max. weight : 400,000 kg

Condition of supply : normalizing, normalizing and tempering , quenching and tempering.

Survey conditions : all forgings to be used for construction of ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.

Remarks : Solid & semi-built type crank shaft (fatigue factor : K=1.15) by super clean steel making
process are approved for low alloy steel such as grade 34CrNiMo6,42CrMo4,
40CrMo8,32CrNiMo6-3 according to Kobe steel -Takasago factory specification
TKR-12-138,TKR-17-028-4G.
Tempering after normalizing for low alloy steel forging for crank shaft,shaft and machinery is
approved. In this case, chemical composition & mechanical properties shall be complied with
PPS-QMP-17-075.
High strength steel such as grade 35CrNiMo8-6 up to tensile strength 1100 MPa(Grade 3)
for solid type crank shaft (fatigue factor : K=1.15) by super clean steel making process are
approved according to Kobe steel -Takasago factory documents No.: TKR-18-087-4G &
PPS-QMP-18-510.



General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

BUSAN January 31, 2023
**** NOTICE: This is NOT an official certificate ****