MED381326CS!001ENGD- -  -  N- MD9907-A1,MD9907-B,MD9907-C -N- S- S- -07/07/2026- Marine Equipment- - SN- S- - N-  - 2,390,006B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED381326CS/001- N-Jun 21, 20312390006
 
Form
  Marine Equipment(TO)
Certification N. MED381326CS/001 - (ENG)
Certificate date 07/07/2026
Type Protezione antincendio
Product Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (c) Heat detectors - Point detectors
Item Nº MED/3.51c

Model
Items/Sizes
MD9907-A1,MD9907-B,MD9907-C
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Directive (EU) 2025/1533
Standard EN 54-5:2017 incl. A1:2018, IEC 60092-504:2016, IEC 60533:2015.
Reference Documents SOLAS 74 Reg. II-2/7,SOLAS 74 Reg. X/3,IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC code) 7,IMO Res. MSC.98(73)-(FSS Code) 9,IMO Res. MSC391(95)-(IGF Code) 11,IMO MSC.1/Circ 1242,RINA Rules for the certification of Marine Equipment
Validity 21/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Chiara Boscolo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED381326CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.51c
Description Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (c) Heat detectors - Point detectors
Type MD9907-A1
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9,19020 Follo (SP),ITALY
Testing standards EN 54-5:2017 incl. A1:2018, IEC 60092-504:2016, IEC 60533:2015.
Reference standards SOLAS 74 Reg. II-2/7; SOLAS 74 Reg. X/3; IMO Res. MSC.36(63)-(1994 HSC Code) 7; IMO Res. MSC.97(73)-(2000 HSC code) 7; IMO Res. MSC.98(73)-(FSS Code) 9; IMO Res. MSC391(95)-(IGF Code) 11; IMO MSC.1/Circ 1242; RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 7, 2026
June 21, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED381326CS/001
Page 1 of 4


Products description:


Series MD9907 Automatic, Addressable, Analogue heat detector:
Main features:

- Provide fire alarm for high temperature
- Monitoring of the temperature inside the room where it is installed
- Send to the Central Unit the temperature analogue values
- Include short circuit isolator functionality

MD9907-A1 IP 67 Heat Detector A1 Class; Alarm threshold: 54°C to 65°C
MD9907-B IP 67 Heat Detector B Class; Alarm threshold: 69°C to 85°C
MD9907-C IP 67 Heat Detector C Class; Alarm threshold: 84°C to 100°C

The MD 9907 case is available with different mounting of cable glands, so as to facilitate mounting operation
in various situation.
The detector continuously monitors the thermistor component and is able to provide a fault signalization in case
of sensor failure.
The communication through the Loop with Central Unit is performed by control cards, which provide to the detectors
the 24Vdc power supply on which a serial transmission signal using MD2 protocol is modulated.
If an alarm is detected an optical signalization (red LED) on the detector housing flashes.


Microdata Due specifications:
Technical Specification: ELET/44835 ST36604 rev. B
Datasheet: ELET/44836 D35546 rev. E
Software description: ELET/44837 SDD36634 rev. 0
Risk Assessment: ELET/44838 D36690 rev. 0


Test Reports:
BRE GLOBAL Ltd Test Report n. TE-P103830-1001 rev. 02 (RINA Id. ELET/44799)

TesLab No. (RINA Rules – Pt C, Ch 3, Sec 8)
- 166117F - a (05/09/2016 - RINA Id. ELET/44800);
- 166117F - b (05/09/2016 - RINA Id. ELET/44801);
- 166117F - c (05/09/2016 - RINA Id. ELET/44804)

TesLaB No (EMC _ EN60092-504: 2016):
- 17B302E-b (RINA Id. ELET/44795)

Note: Technical equivalence with EN 54-5:2017+A1:2018 is considered demonstrated based on the original EN 54-5:2000+A1:2002 test reports and supplementary EMC testing performed according to the updated requirements reported in the Test Report TesLab No. 17B302E-b.




ATTACHMENT TO
CERTIFICATE No. MED381326CS/001
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****