MED509824CSENGF- -  -  N- SX1200 -N- S- S- -09/01/2025- Marine Equipment- - SN- S- - N-  - 268,661B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED509824CS- N-Jan 8, 2030268661
 
Form
  Marine Equipment(TO)
MED014425NA/001,MED014425NA/002,MED014425NA/003,MED014425NA/004,MED014425NA/005,
MED014425NA/006,MED014425NA/007,MED014425NA/008,MED014425NA/009,MED014425NA/010,
MED014425NA/011,MED014425NA/012,MED014425NA/013,MED014425NA/014,MED014425NA/015,
MED229026NA/001,MED229026NA/002,MED229026NA/003,MED229026NA/004,MED229026NA/005
Certification N. MED509824CS - (ENG)
Certificate date 09/01/2025
Type Apparecchi di navigazione
Product Night vision equipment for high-speed craft
Item Nº MED/4.43

Model or Denomin.
Items
SX1200
Applicant M.a.s. Marine Srl
Place of requester Via  Armando Diaz 10  %  80055 Portici (NA)  % ITALY
Tel. N.,Fax, Email +393334096003, +390817752049, info@mas-marine.com
Directive (EU) 2024/1975
Standards ISO 16273: 2003,EN60945 (2002) incl. IEC 60945 Corr.1 (2008),EN62288:2014
Reference Documents Solas 74 Reg. X/3 ,IMO Res. MSC.36 (63)-(1994 HSC code) 13,IMO Res. MSC.97 (73)-(2000 HSC code) 13,IMO Res. A.694(17),IMO Res. MSC.94(72),MO Res. MSC.191 (79)
Expire date 08/01/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Claudio Langella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED509824CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/4.43
Description Night vision equipment for high-speed craft
Type SX1200
Applicant M.a.s. Marine Srl
Via Armando Diaz 10,80055 Portici (NA),ITALY
Testing standards ISO 16273: 2003,EN60945 (2002) incl. IEC 60945 Corr.1 (2008),EN62288:2014
Reference standards Solas 74 Reg. X/3 ; IMO Res. MSC.36 (63)-(1994 HSC code) 13; IMO Res. MSC.97 (73)-(2000 HSC code) 13; IMO Res. A.694(17); IMO Res. MSC.94(72); MO Res. MSC.191 (79)
Issued in Genoa on
This Certificate is valid until
January 9, 2025
January 8, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED509824CS
Page 1 of 2
Description :

Night Vision Equipment model SX 1200 consisting of:

a) Pan-Tilt Camera based on a light intensifier tube model TLC-SX 750880 with WDR CCD,
in a aluminum alloy enclosure for open deck installation.
External lens are Bioclean TM type
Range of focus: 5m to ∞

b) Control box model CNT-SX-9000
allowing interface to Video Camera, Joystick and Monitor
Power supply: 12 / 24Vdc

c) Joystic Box model JSK- SX112
including all the controls and signalling required to operate the SX 1200 Night Vision System

d) Monitor 17" TFT _ flush mount, model MNT17 B 1200 86/F
Res. 1080 x 1024; Pitch 0.264 x 0.264;
Power supply: 12 / 24Vdc

Reference documents:
Drawings: TLC-SX 750880; JSK-SX112; CNT-SX-9000; MN17-B-1200 86/F
Installation and Operator's Manual 001/18 (04/06/2018)

TesLab Test reports: n. 18C303F-A (2019.02.25); 18C303F-B (2019-02-25); 19A289N Rev. 1 (2019.11.21)
RINA report for testing according to Resolution MSC.94(72) _ 24/09/2009 (12 pages)
RINA additional report on RINA form Visite 2 _ 15-24 /09/2009 (one page)
RINA Sea trial record - Annex C ISO 16273:2003 _ 24/09/2009 (3 pages)

Disclaimer:

In case of adverse weather condition a degraded image quality may be rendered by the Night Vision System

and even cleanness of camera lenses may be reduced (eg. salt moisture thickening , icing etc. ).

As a consequence Night Vision System shall be continuously monitored for possible image degradation

during ship sailing at night.

Whenever a poor image quality is experienced, Night Vision System to be put out of service and navigation speed

to be decreased to a suitable rate to maintain a safe navigation.





ATTACHMENT TO
CERTIFICATE No. MED509824CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****