MED344326WSENGD- -  -  N-  LJ-LJ Adult -N- S- S- -11/06/2026- Marine Equipment- - SN- S- - N-  - 1,137,536B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED344326WS- N-Jun 10, 20311137536
 
Form
  Marine Equipment(TO)
Certification N. MED344326WS - (ENG)
Certificate date 11/06/2026
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
LJ-LJ Adult
Applicant LJSAFE TECHNOLOGY CO., LTD.
Place of requester No.66 Chuangxin Avenue,Taizhou City,Jiangsu Province China.
Tel. N.,Fax, Email +86 52 86875583, ---, tec@ljsafe.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1470, IMO MSC.1/Circ.1628 Rev2.
Request 3/30/2026
Expire date 10/06/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED344326WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.4
Description Life jackets
Type LJ-LJ Adult
Applicant LJSAFE TECHNOLOGY CO., LTD.
No.66 Chuangxin Avenue,Taizhou City,Jiangsu Province China.
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1470, IMO MSC.1/Circ.1628 Rev2.
Issued in SHANGHAI on
This Certificate is valid until
June 11, 2026
June 10, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED344326WS
Page 1 of 3

Product Description


The Inherently Lifejacket (Type: LJ-LJ Adult) is designed for adult, with the following main components:
Fabric/Item
Material
Size/Type
Supplier
Cover
Oxford Cloth (Orange)
300D*300D
Suzhou Wujiang Heng Rong Textile Co., Ltd
Oxford Cloth (Yellow)
300D*300D
Suzhou Weishan Needle Textile Co.,Ltd.
Buoyancy Material
Polyethyene Foam Slice
EPE
Kunshan Tianhong New Packaging Material Co. Ltd.
Reflective Tape
-
YSL-1101A/ YSL-1101B
Ye shili New Materials(Xianju)Co.,Ltd.
Lifejacket Light
-
W4-A
Daniamant ApS
Chest Ribbon
Polyester
-
Suzhou Voyage Rope Net Co., Ltd
Large Buckle
Plastic
RH0901
Yuyao City Ditang Village Ronghua Plastic Factory
Lifting Ring
Polyester
Tension>3200N
-
Suzhou Voyage Rope Net Co., Ltd
Velcro Backing
Polyester
-
Suzhou Voyage Rope Net Co., Ltd
Whistle
Plastic
-
Yuyao City Ditang Village Ronghua Plastic Factory
Belt
Polyester
Tension>3200N
-
Suzhou Voyage Rope Net Co., Ltd
Buddy line
Polyester
-
Suzhou Voyage Rope Net Co., Ltd
Application/Limitation of Use
  • This lifejacket is approved for use only by adult (Front wear), whose weight is more than 43 Kg; Height is higher than 155 cm.


  • ATTACHMENT TO
    CERTIFICATE No. MED344326WS
    Page 2 of 3
  • Temperature Range : -30℃ ~ +65℃.
  • Buoyance lost after 24 hours : ≤5%.
  • Able to fit person weighing up to 140 Kg and with a chest girth of up to 1750 mm.
  • The lifejackets can be equipped with different position indicating lights and Retro-Reflective materials EC Type Approved in compliance with Directive 2014/90/EU as amended.
Design Assessment The design assessment is based on IMO Res.MSC.48(66)-(LSA Code) as amended by IMO Res.MSC.207(81), IMO Res.MSC.218(82) and IMO Res. MSC.368(93), IMO Res. MSC.481(102) and IMO Res. MSC.554(108) etc.. Tests carried out in accordance with revised recommendation on testing of lifesaving appliance, IMO Res.MSC.81(70), Part 1, including IMO Res.MSC.200(80), IMO Res.MSC.226(82), IMO Res.MSC.323(89), IMO Res. MSC.378(93), IMO Res.MSC.544(107) and IMO Res. MSC.563(108) etc.. Production tests shall be conducted for each suit in accordance with IMO Res. MSC.81(70), part 2. Test Carried Out Tests carried out by Wuhan Testing Center of Marine Life-saving Appliances; Test Report (Fabric) (Ref No. 2016068) dated on 2016.05.30, and filled with RINA No. SHFP-12673; Test Report (Fabric) (Ref No. 2019094) dated on 2019.08.08, and filled with RINA No. SHFP-27418; Test Report (Sewing Thread) (Ref No. 2016069) dated on 2016.05.30, and filled with RINA No. SHFP-12674; Test Report (Structural Webbing) (Ref No. 2016070) dated on 2016.05.30, and filled with RINA No. SHFP-12675; Test Report (Hardware) (Ref No. 2016071) dated on 2016.05.30, and filled with RINA No. SHFP-12676; Lifejacket Material Evaluation and Test Report (Buoyancy Material) (Ref No. 2016072) dated on 2016.04.28 to 2016.05.26, and filed with RINA No. SHFP-12677; RTD (Serial No.:SN 037) BUOYANCY DATASHEET (ADULT) dated on 2018.10.10, and filled with RINA No. SHFP-12772; Inherently Buoyant Lifejackets Evaluation and Test Report (Type: LJ-LJ Adult) (Ref No. 2018106) dated on 2018.08.20 to 2018.10.13, and filled with RINA No. SHFP-18763; Lifejacket performance test carried out by Lingjack Fire Safety Equipment (Shanghai) Co., Ltd and filled with RINA No. SHFP-18738; Routine Test Report dated on 2024.05.26, and filled with RINA No. SHFP-27419; Routine Test Report dated on 2026.05.12, and filled with RINA No. SHFP-37955. Reference Documents Technical Drawings and manuals approved and filed by RINA letter No.: SHFP/2018/00845/XZO01, SHFP/2018/00874/XZO01, SHFP/2019/00029/XZO01, SHFP/2021/00563/XZO01, SHFP/2024/620/XZO01 and SHFP/2024/631/XZO01. Marking of Product The product is to be indelibly marked with name of manufacturer, type designation and date of manufacture. The markings shall comply with the IMO Res. MSC.48(66)-(LSA Code), item 1.2.2.9 and 2.2.1.2. Notes Renewal of Previous EC Type Examination (Module B) Certificate No.:MED313824WS dated June 21, 2024. As declared, the initial conditions at the time of the approval are maintained.




ATTACHMENT TO
CERTIFICATE No. MED344326WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****