Steel making process: basic oxygen process.
Casting process: continuous casting.
Deoxidation practice: fully killed, fine grained steel
Mechanical properties, and survey conditions: the plates are to comply in all respects with the RINA
Rules (Part D and Part E) in relation to the minimum design temperature and relevant thickness and are to
be tested accordingly.
Condition of supply and thickness:
Grade | Grade acc. to EN 10028-4 | Product | Steel- making | Max. Thickness [mm] | Heat treatment condition |
1,5 Ni | 15NiMn6 | Plate | BOC, CC | 50 | Q+T |
3,5 Ni | 12Ni14 | Plate | BOC, CC | 40 | N |
|
|
| 50 | Q+T |
5,0 Ni | X12Ni5 | Plate | BOC, CC | 40 | N |
|
|
| 50 | Q+T |
9,0 Ni | X8Ni9+NT640 | Plate | BOC, CC | 40 | N+N+T |
X8Ni9+QT640 | Plate | BOC, CC | 50 | Q+T |
X8Ni9+QT680 | Plate | BOC, CC | 50 | Q+T |
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
Ilsenburger Grobblech GmbH is authorized to carry out inspection on his own responsibility acc. to valid Alternative Testing Scheme (ATS). |
|