1. Product Description
1.1. lithium iron phosphate Cell performance
| Parameter | Specification | Considion |
| Model | CBC10 |
|
| Typical capacity | 317Ah | Fresh state, 25±2℃ |
| Operation voltage | 2.5~3.65V
2.0~3.65V | Temperature >0℃
Temperature ≤0℃ |
| Impedance (1kHz) | 0.177±0.06mΩ | Fresh state (40%±5%SOC) |
| Self-discharge rate | ≤3.5%/month | 25℃, 50%SOC, 3 months after fresh state |
| Operation temperature | -5~60℃ | Charge |
| Operation temperature | -35~60℃ | Discharge |
| Cell weight | 5.50±0.5kg |
|
| Standard charge current | 0~95%SOC 0.5C;
95%~100%SOC 0.33C | 25±2℃ |
| Maximum continuous charge current | 1C | 25±2℃, 0%≤ SOC ≤80% |
| Standard discharge current | 0.5C | 25±2℃ |
| Maximum continuous discharge current | 1C | 25±2℃, 20%≤ SOC ≤100%. |
| Standard charge temperature | 25±2℃ | Test ambient temperature |
1.2. Battery Pack performance parameters:
| Project name | Technical parameters | Remarks |
| Model | L317G01 |
|
| Battery cell | CBC10 |
|
| Rated capacity (Ah) | 317 | StepCharge/1C 100% DOD, 25 ℃ |
| Battery group scheme | 1P16S |
|
| Nominal voltage (V) | 51.52 | Single platform voltage: 3.22 V |
| Operating voltage range (V) | 40 ~ 58.4 | Monomer voltage range: 2.5 V ~ 3.65 V |
| Rated storage energy (kWh) | 16.331 | 100% DOD, 25 ℃ |
| Standard charging current (A) | 0~95%SOC 0.5C;
95%~100%SOC 0.33C | 25 ℃±2℃ |
| Maximum continuous discharge current (A) | 317 | 25℃±2℃, 20%<SOC < 100% |
| Self-discharge rate/month | < 3.5% | 25 ℃, SOC 40%, fresh cell stored for 3 months |
| IP Protection | IP67 |
|
| Weight (kg) | 116.3±3 |
|
TYPE APPROVAL CERTIFICATE
No. ELE628725WS
Enclosure - Page 2 of 3
1.3. Battery System Specification:
| Project name | Technical parameters | Remarks |
| BMS Model | Eship6.0 |
|
| Battery type | Lithium iron phosphate battery |
|
Working ambient
temperature | Charging:-5 ~ + 60 ℃
Discharge:-35 ~ + 60 ℃
Storage:-30 ~+ 60 ℃ | Batteries below -5 ℃
are not allowed to be
charged |
| IP Protection Level | Pack and Slave HV Box IP67
Control Cabinet IP22 |
|
External communication
mode | CAN/ Modbus TCP/RS485 |
|
1.4. Battery System Architecture:
The Battery Management System, also known as BMS, is responsible for coordinating the entire high-voltage battery system to provide sufficient power for ships and power for marine equipment.
The battery system adopts with BMS control structure: CSC, SBMU and MBMU or CSC and MBMU.
- CSC (Cell Supervision Circuit ) is a basic battery management unit, to collect battery cell voltage, temperature and perform cell balance function.
- MBMU (Master Battery Management Unit ) is a multiple-battery-string level control and management unit, to indicating, monitoring and control the battery string and connected with external applications, used for coordinating with outside system and inside battery strings.
- SBMU (Slave Battery Management Unit ) is a battery-string level control and management unit, which is used for contactor control, total voltage monitoring, string insulation detection, and accept/send control instructions, etc.
TYPE APPROVAL CERTIFICATE
No. ELE628725WS
Enclosure - Page 3 of 3
2. Reference Documents:
+ Battery Cell, Pack and Battery system technical specification. Filed by RINA with drawing No.SHEL-27548.
+ Battery chemistry safety analysis and risk assessment. Filed by RINA with drawing No.SHEL-27365.
+ Battery system operation and maintenance instructions. Filed by RINA with drawing No.SHEL-27363
+ FAT reports and Narrative report witnessed by our attending Surveyor. Filed by RINA with drawing No.SHEL-27364, SHEL-27366 and SHEL-27546.
+ Test program for the battery system. Filed by RINA with drawing No.SHEL-27362.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-27357
+ Manufacturer's information, Filed by RINA with drawing No. SHEL- 27356.
+ Test reports carried by laboratory authorized by CNAS, Filed by RINA with drawing No.: SHEL-27358 ~ 27361.
+ Statement for the second manufacturer. Filed by RINA with drawing No. SHEL-27549.
3. Notes/Remarks:
+ The products cited in this certificate also product in the company "Fuding Contemporary Amperex Technology Limited" with Manufacturer address "No.1, Shidai Road, Xueqiao village, Qianqi Town, Fuding City, Ningde City, Fujian Province, P.R. China."
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
+ The documentation mentioned in Pt C, Ch 2, App 2 of RINA Rules for the Classification of Ships is to be submitted for each particular application. Special attention is to be paid to the requested Risk Assessment. |
|