| Description |
| CPUs * |
PM5630-2ETH | Program memory: 8MB; 2xEthernet |
| PM5650-2ETH | Program memory: 80MB; 2xEthernet |
| PM5670-2ETH | Program memory: 160MB; 2xEthernet |
| PM5675-2ETH | Program memory: 160MB; Data Storage; 8GB; 2xEthernet |
| PM572 | Program memory: 128kB |
| PM573-ETH | Program memory: 512kB: Ethernet |
| PM582 | Program memory: 512kB |
| PM583-ETH | Program memory: 1024kB; Ethernet |
| PM585-ETH | Program memory: 1024kB, Ethernet |
| PM590-ARCNET /-ETH | Program memory: 2MB; ARCNET; Ethernet |
PM591-ETH | Program memory: 4MB; Ethernet |
| PM591-2ETH | Program memory: 4MB; 2x Ethernet |
| PM592-ETH | Program memory: 4MB; Ethernet |
| PM595-4ETH-F | Program memory: 32MB; 2x Ethernet; 2x2 Fieldbus (RJ45) |
| PM595-4ETH-M-XC | Program memory: 32MB; 2x Ethernet; 2x2 Fieldbus (RJ45) |
| CPU Terminal Bases (TBs) * |
| TB511-ETH | slots: 1x CPU, 1x Communication Module, with Ethernet RJ45 |
| TB511-ARCNET | slots: 1x CPU, 1x Communication Module, with ARCNET BNC |
| TB521-ETH | slots: 1x CPU, 2x Communication Module, with Ethernet RJ45 |
| TB521-ARCNET | slots: 1x CPU, 2x Communication Module, with ARCNET BNC |
| TB523-2ETH | slots: 1x CPU, 2x Communication Modules, with 2x Ethernet RJ45 |
| TB541-ETH | slots: 1x CPU, 4x Communication Module, with Ethernet RJ45 |
| TB5600-2ETH | slots: 1x CPU, with 2x Ethernet RJ45 and 1x CAN |
| TB5610-2ETH | slots: 1x CPU, 1x Communication Module, with 2x Ethernet RJ45 and 1x CAN |
| TB5620-2ETH | slots: 1x CPU, 2x Communication Modules, with 2x Ethernet RJ45 and 1x CAN |
| TB5640-2ETH | slots: 1x CPU, 4x Communication Modules, with 2x Ethernet RJ45 and 1x CAN |
| TB5660-2ETH | slots: 1x CPU, 6x Communication Modules, with 2x Ethernet RJ45 and 1x CAN |
| Communication modules * |
| CM574-RS | Communication Module Serial: - Programmable |
| CM579-PNIO | Communication Module PROFINET IO Controller; Integrated 2-port switch |
| CM597-ETH | Communication Module Ethernet TCP/IP with integrated 2-port switch |
| CM579-ETHCAT | Communication Module EtherCAT master, 2 x RJ45 (ETHCAT1 and ETHCAT2) |
| CM582-DP | Communication Module PROFIBUS DP |
| CM588-CN | Communication Module CANopen: - CANopen Slave 1 Mbit/s |
| CM589-PNIO, CM589-PNIO-4 | Communication Module PROFINET 2xRJ45, IO Controller; Integrated 2-port switch,
4xPROFINET IO-Devices |
| CM592-DP | Communication Module PROFIBUS DP: - Master 12 MBit/s |
| CM598-CN | Communication Module CANopen: - CANopen Master 1 Mbit/s |
| CM5610-2RS | Communication Module Serial |
| CM5640-2ETH | Communication Module Ehternet |
(*) ... may be followed by -XC (Extreme Condition)
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 2 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC
AC500-eCo / S500-eCo
|
Type | Description | DI
24V DC | DO
24V DC | DI/DO
config. | AI
12 bit res. | AO
12 bit res. |
| Communication Interface modules for decentralized I/Os * |
|
|
|
|
|
CI501-PNIO | PROFINET RT Device | 8 | 8 | - | 4 | 2 |
CI502-PNIO | PROFINET IO RT Device | 8 | 8 | 8 | - | - |
| CI504-PNIO | PROFINET IO RT Device
- 3 Serial UART Interfaces (RS-232, RS-422 or RS-485) | - | - | - | - | - |
| CI506-PNIO | PROFINET IO RT Device
- 2 Serial UART Interfaces (RS-232, RS-422 or RS-485)
- 1 CANopen Master Interface | - | - | - | - | - |
CI511-ETHCAT | EtherCAT Bus Module with Cam switch functionality | 8 | 8 | - | 4 | 2 |
CI512-ETHCAT | EtherCAT Bus Module with Cam switch functionality | 8 | 8 | 8 | - | - |
| CI521-MODTCP | Modbus Communication Interface Module | 8 | 8 | - | 4 | 2 |
| CI522-MODTCP | Modbus Communication Interface Module | 8 | 8 | 8 | - | - |
| CI541-DP | PROFIBUS DP Bus Module | 8 | 8 | - | 4 | 2 |
| CI542-DP | PROFIBUS DP Bus Module | 8 | 8 | 8 | - | - |
| CI581-CN | CANopen Bus Module | 8 | 8 | - | 4 | 2 |
| CI582-CN | CANopen Bus Module | 8 | 8 | 8 | - | - |
| CI590-CS31-HA | High Availabillity CS31 Bus Module:
- 2 independent CS31 bus interfaces | - | - | 16 | - | - |
| CI592-CS31 | CS31 Bus Modul with DI, DO, AI and AO | 8 | - | 8 | 4 | 2 |
| DC551-CS31 | CS31 Bus Module with DI and DO | 8 | - | 16 | - | - |
| Digital I/O modules (S500) * |
|
|
|
|
|
| DA502 | Digital/Analog Input/Output Module
- Fast Counter | - | 16 | 8 | 4 | 2 |
| DC522 | Digital Input/Output Module | - | - | 16 | - | - |
| DC523 | Digital Input/Output Module | - | - | 24 | - | - |
| DC532 | Digital Input/Output Module | 13 | - | 16 | - | - |
| DC541-CM | Digital Input/Output Module
- DI/DO in a communication module housing | - | - | 8 | - | - |
| DC562 | Digital Input/Output Module | - | - | 16 | - | - |
| DI524 | Digital Input Module | 32 | - | - | - | - |
| DO524 | Digital Output Module | - | 32 | - | - | - |
| DO526 | Digital Output Module | - | 8 | - | - | - |
| DX522 | Digital Input/Output Module | 8 | 8 (relay) | - | - | - |
| DX531 | Digital Input/Output Module | 8
(120/
230V AC) | 4 (relay) | - | - | - |
| FM502-CMS | Condition monitoring module | 2 | - | 2 | 16 | - |
|
|
|
|
|
|
|
| PD501- 4CH | Positioning Module: - 24V DC motor output | - | - | - | 4 | - |
| Encoder & PWM module * |
|
|
|
|
|
| CD522 | Encoder & PWM Module
- 2 encoder inputs with 2 separated 5V power supplies
- 2 PWM outputs
- Module - wise electrically isolated | 2 | - | 8 | - | - |
| Analog I/O modules * |
|
|
|
|
|
| AO523 | Analog Output Module | - | - | - | - | 16 |
| AI523 | Analog Input Module | - | - | - | 16 | - |
| AI531 | Analog Input Module | - | - | - | 8
(15bit) | - |
(*) ... may be followed by -XC (Extreme Condition)
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 3 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC,
AC500-eCo / S500-eCo
|
Type | Description | DI
24V DC | DO
24V DC
0,5A max | DI/DO
config. | AI
12 bit res. | AO
12 bit res. |
| Analog I/O modules * |
|
|
|
|
|
| AX521 | Analog Input/Output Module | - | - | - | 4 | 4 |
| AX522 | Analog Input/Output Module | - | - | - | 8 | 8 |
| DA501 | Input/Output Module | 16 | - | 8 | 4 | 2 |
| AC522 | Analog Output Module | - | - | - | 8 | 8 |
(*) ... may be followed by -XC (Extreme Condition)
Type | Description |
| Terminal units (TUs) * |
| TU505 / TU506 | FBP Terminal Units TU505-FBP and TU506-FBP for FBP Interface Modules
- TU505-FBP, FBP Terminal Unit, Screw-type Terminals
- TU506-FBP, FBP Terminal Unit, Spring Terminals |
TU507-ETH / TU508-ETH
| ETH-Terminal Units TU507-ETH and TU508-ETH for PROFINRT- or EtherCAT Bus Modules
- TU507-ETH, Ethernet Terminal Unit, Screw Terminals
- TU508-ETH, Ethernet Terminal Unit, Spring Terminals |
| TU509 / TU510 | Terminal Units for PROFIBUS Bus Modules
- TU509, PROFIBUS BusTerminal Unit, Screw Terminals
- TU510, PROFIBUS Bus Terminal Unit, Spring Terminals |
| TU515 / TU516 | I/O Terminal Units TU515 and TU516 for I/O expansion modules
- TU515, I/O Terminal Unit, 24 V DC, Screw Terminals
- TU516, I/O Terminal Unit, 24 V DC, Spring Terminals |
| TU516-H | I/O Terminal Unit, hot swap, 24 V DC, Spring Terminals |
| TU517 / TU518 | Terminal Units for CANopen or DeviceNet Modules
- TU517, CANopen or DeviceNet Terminal Unit, Screw Terminals
- TU518, CANopen or DeviceNet Terminal Unit, Spring Terminals |
| TU520-ETH | PROFINET IO Terminal Unit for PROFINET IO Bus Modules
- 2x RJ 45 interfaces for connection to PROFIBUS network, 3 removable connectors for bus systems |
| TU531 / TU532 | I/O Terminal Units TU531 and TU532 for I/O expansion modules
- TU531, I/O Terminal Unit, 230 VAC, Screw Terminals
- TU532, I/O Terminal Unit, 230 V AC, Spring Terminals |
| TU532-H | I/O Terminal Unit, hot swap, 230 V AC, Spring Terminals |
| TU542-H | I/O Terminal Unit, hot swap, 24 V DC, Spring Terninals |
TU551-CS31 /
TU552-CS31 | Terminal Units TU551-CS31 and TU552-CS31 for CS31 Bus Modules
- TU551-CS31, CS31 Bus Terminal Unit, 24 V DC, Screw Terminals
- TU552-CS31, CS31 Bus Terminal Unit, 24 V DC, Spring Terminals |
| TU541 / TU542 | Terminal Units TU541 and TU542 for Positioning modules PD501
- TU541, Terminal Unit, 24 V DC, Screw Terminals
- TU542, Terminal Unit, 24 V DC, Spring Terminals |
| Terminal Base with function* |
| TF501-CMS | Terminal Base Func.Mod.Term.Base, 0x coupler slots,Ethernet, 24V DC, spring terminals |
| TF521-CMS | Terminal Base Func.Mod.Term. Base, 2x coupler slots, Ethernet, 24V DC, spring terminals |
| Safety CPU* |
| SM560-S | Safety CPU (Safety Module) for up to SIL3 (IEC 61508 and IEC 62061) and PL e (ISO 13849) safety applications |
| SM560-S-FD-1 | Safety CPU (Safety Module) for up to SIL3 (IEC 61508 and IEC 62061) and PLe (ISO 13849) safety applications with F-Device functionality for 1xPROFIsafe network |
| SM560-S-FD-4 | Safety CPU (Safety Module) for up to SIL3 (IEC 61508 and IEC 62061) and PLe (ISO 13849) safety applications with F-Device functionality for 4xPROFIsafe network |
| Safety I/O modules* |
| DI581-S | Safety binary input module DI581-S with 16 safety input channels (up to SIL2 or PL d) or 8 safety input channels
(up to SIL3 or PL e) with 8 test pulse output channels |
| DX581-S | Safety binary input/output module DX581-S with 8 safety output channels and 8 safety input channels (up to SIL2
or PL d) or 4 safety input channels (up to SIL3 or PL e) with 4 test pulse output channels |
| AI581-S | Safety analog input module AI581-S with 4 safety current input channels 0...20 mA (up to SIL2 or PL d) or 2 safety
current input channels (up to SIL3 or PL e) |
| Safety Terminal Unit* |
| TU582-S | Spring-type terminal unit TU582-S for safety I/O modules |
(*) ... may be followed by -XC (Extreme Condition)
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 4 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC
AC500-eCo / S500-eCo |
Type | Description |
| Accessory |
| TA521 | Lithium Battery: 3 V, 560 mAh, Primery cell, non-rechargeable |
| TA523 | Pluggable Marker Holder: - For labeling the channels of S500 I/O modules |
| TA524 | Dummy Communication Module: - To cover an unused communication module slot of a Terminal Base |
| TA525 | Set of 10 white Plastic Markers: - To lable AC500 and S500 modules |
| TA526 | Wall Mounting Accessory: - For insertion at the rear side of Terminal Bases and Terminal Units |
| TA566 | Wall Mounting Accessory: - For mounting without DIN rail of eCo Modules and PM55x/PM56x CPUs |
| TA560: | Lithium Battery for Real-Time Clock of PM55x and PM56x CPUs |
| TA561-RTC | Real Time Clock Adaptor |
| TA562-RS | Serial RS-485 Adaptor |
| TA569-RS-ISO | RS-485 adapter for galvanic isolation of PM55x-xP and PM56x-xP |
| TA562-RS-RTC | Serial RS-485 and Real-Time Clock Adaptor |
| TK501 | Programming Cable: - PC side: SUB-D, 9-pole, female; - AC500 side: SUB-D, 0-pole, male; - Length: 5 m |
| TK502 | Programming Cable: - PC side: SUB-D, 9-pole, female; - AC500 side: terminal block, 9-pole, female; - Length: 5 m: |
| TK503 | Programming Cable: - PC side: USB connector type A; - AC500 side: SUB-D, 0-pin, male; - Length: 3 m |
| TK504 | Programming Cable: - PC side: USB connector type A; - AC500side: 5-pole terminal block; - Length: 3 m |
| TK506 | RS-485 isolator for COM1 |
| MC503 | SD Memory Card Adaptor |
| MC502 | SD Memory Card |
| Terminal blocks: |
| TA56x | S500,Terminal block,F/F or F/S, 9 or 11 poles screw or spring connection |
CPUs: Common features: PM554 and PM564 can operate up to seven S500/S500-eCo I/O devices
CPU type | Program memory | Digital Inputs | Digital
Outputs | Analog Inputs | Analog
Ouputs | Power
supply | Ether. interf. | Other interf. |
PM554-TP | 128 kB | 8 x 24V DC | 6 x 24 V DC, 0.5 A max. (transistor) | none | none | 24 V DC | - | Serial RS-485 interface (COM1)
Serial RS-485 interface (COM2, optional)
I/O-Bus
SD Memory Card slot (optional) |
PM554-TP-ETH | 8 x 24V DC | 6 x 24V DC, 0.5A max. (transistor) | none | none | 24V DC | x |
PM554-RP | 8 x 24V DC | 6 x relay, 2A max. | none | none | 24V DC | - |
PM554-RP-AC | 8 x 24V DC | 6 x relay, 2A max | none | none | 100 to 240V AC | - |
| PM564-TP | 6 x 24V DC* | 6 x 24V DC, 0.5A max. (transistor) | 2 x voltage* | 1 x voltage or current | 24V DC | - |
PM564-TP-ETH | 6 x 24V DC* | 6 x 24V DC, 0.5A max. (transistor) | 2 x voltage* | 1 x voltage or current | 24V DC | x |
| PM564-RP | 6 x 24V DC* | 6 x relay, 2A max. | 2 x voltage* | 1 x voltage or current | 24V DC | - |
| PM564-RP-ETH | 6 x 24V DC* | 6 x relay, 2A max. | 2 x voltage* | 1 x voltage or current | 24V DC | x |
| PM564-RP-AC | 6 x 24V DC* | 6 x relay, 2A max. | 2 x voltage* | 1 x voltage or current | 100 to 240V AC | - |
| PM564-RP-ETH-AC | 6 x 24V DC* | 6 x relay, 2A max. | 2 x voltage* | 1 x voltage or current | 100 to 240V AC | x |
(*) PM564 has 2 analog inputs which can be configured as digital inputs. If the analog inputs are configured as digital inputs, 8 digital inputs totally are available. |
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 5 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC
AC500-eCo / S500-eCo
|
CPUs: Common features: PM554 and PM564 can operate up to seven S500/S500-eCo I/O devices
CPU type | Program memory | Digital Inputs | Digital
Outputs | Analog Inputs | Analog
Ouputs | Power
supply | Ether. interf. | Other interf. |
| PM556-TP-ETH | 512 KB | 8 x 24V DC | 6 x 24V DC, 0.5A max. (transistor) | none | none | 24V DC | x |
|
| PM566-TP-ETH |
| 6 x 24V DC | 6 x 24V DC, 0.5A max. (transistor) | 2 x voltage* | 1 x voltage or current | 24V DC | x |
|
(*) PM564 has 2 analog inputs which can be configured as digital inputs. If the analog inputs are configured as digital inputs, 8 digital inputs totally are available. |
Type | Description |
| Digital I/O modules |
| DC561, DC562 | 16 isolated configurable Input or Output 24V DC (Transistors) |
| DX561 | 8 isolated DI 24V DC, 8 DO 24V DC (Transistor) |
| DX571 | 8 isolated DI 24V DC, 8 digital relay output 120/240V AC, groupwise electrically isolated |
| DI561 | 8 DI 24V DC |
| DI562 | 2x 8 isolated DI 24V DC |
| DI571 | 8 DI 120-240V AC |
| DI572 | 16 isolated DI 100-240V AC |
| DO561 | 8 DO 24V DC (Transistor) |
| DO562 | 16 DO 24V DC, 0.5A max. |
| DO571 | 8 relay outputs 120-240V ACac , 2A max |
| DO572 | 8x DO 115-230V AC / 0.3A |
| DO573 | Digital Relay Output Modules: 16x relay 24V DC/100-240V AC, 2A max. |
| FM562 | Pulse Train Output Module
- 2 axes motion control
- 2 pulse train outputs per axis, RS-422
- 2 configurable digital inputs per axis, 24 V DC
- 32 bits registers for position and speed value
- 2x 2 DI 24V DC, 2x 2 DO 24V DC 0.5A max. |
| Analogue I/O modules |
| AX561 | 4 configurable x AI: -2,5... +2,5V; -5... +5V; 0...+5V; 0...+10V; 0...20mA; 4.. 20 mA
2 configurable x AO: -10V ... +10V; 0...20mA; 4...20 mA |
| AI561 | 4 configurable x AI |
| AI562 | 2 configurable analog resistance temperature detector (RTD) inputs |
| AI563 | 4 isolated configurable thermocouple (TC) inputs |
| AO561 | 2 configurable x AO: -10V...+10V; 0...20mA; 4...20mA |
Software: (Only relevant for AC500-S Safety products!):
Type PS501; Control Builder Plus V2.2.1 or later (it may be included in Automation Builder software package)
CPUs: Common features: PM5012
CPU type | Program memory | Digital Inputs | Digital
Outputs | Analog Inputs | Analog
Ouputs | Power
supply | Ether. interf. | Option
board |
| PM5012-T-ETH |
| 6 x 24V DC | 4 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 1 | 1 |
| PM5012-R-ETH | 1 MB | 6 x 24V DC | 4 x relay, 2A max. | - | - | 24V DC | 1 | 1 |
| PM5032-T-ETH |
| 12 x 24V DC | 10 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 1 | 2 |
| PM5032-R-ETH | 2 MB | 12 x 24V DC | 6 x relay, 2A max.
2 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 1 | 2 |
| PM5052-T-ETH |
| 12 x 24V DC | 10 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 1 | 3 |
| PM5052-R-ETH | 4 MB | 12 x 24V DC | 6 x relay, 2A max.
2 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 1 | 3 |
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 6 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC
AC500-eCo / S500-eCo
|
CPUs: Common features: PM5012
CPU type | Program memory | Digital Inputs | Digital
Outputs | Analog Inputs | Analog
Ouputs | Power
supply | Ether. interf. | Option
board |
| PM5072-T-2ETH | 8 MB | 12 x 24V DC | 10 x 24V DC, 0.5A max. (transistor) | - | - | 24V DC | 2 | 3 |
| PM5072-T-2ETHW | 8 MB | 12 x 24V DC | 10 x 24V DC, 0.5A
max. (transistor) | - | - | 24V DC | 2 | 3 |
| PM5082-T-2ETH | 8 MB | 12 x 24V DC | 10 x 24V DC, 0.5A
max. (transistor) | - | - | 24V DC | 2 | 3 |
PM5052-R-ETHL | 84 MB | 12 x 24V DC | 6 x relay, 2A max.
2 x 24V DC, 0.5A
max. (transistor) | - | - | 24V DC | 1 | 3 |
Type | Description |
| Option boards |
| TA5101-4DI | Digital input module option board, 4DI 24V DC, spring/cable front |
| TA5101-4DIW | Digital input module |
| TA5105-4DOT | Digital output module option board, 4DO-T 24V DC / 0.5A, spring/cable front |
| TA5105-4DOTW | Digital output module |
| TA5110-2DI2DOT | Digital in/output module option board, 2DI 24V DC, 2DO-T 24V DC / 0.5A, spring/cable front |
| TA5110-2DI2DOW | Digital in/output module |
| TA5120-2AI-UI | Analogue input module |
| TA5120-2AI-UIW | Analogue input module |
| TA5123-2AI-RTD | Analogue input module |
| TA5123-2AI-RTW | Analogue input module |
| TA5126-2AO-UI | Analogue output module |
| TA5126-2AO-UIW | Analogue output module |
| TA5130-KNXPBW | KNX address switch option board |
| TA5141-RS232I | RS-232 serial adapter isolated option board, spring/ cable front |
| TA5141-RS232IW | RS-232 serial adapter |
| TA5142-RS485I | RS-485 serial adapter isolated option board, spring/ cable front |
| TA5142-RS485 | RS-485 serial adapter none isolated option board, spring/cable front |
| TA5142-RS485IW | RS-485 serial adapter |
| TA5142-RS485W | RS-485 serial adapter |
| TA5130-KNXPB | KNX address switch option board, 1 push button |
| TA5131-RTC | Real-time clock without battery, option board for AC500-eCo V3 Basic CPU |
| Memory Card |
| MC5102 | Micro memory card with micro memory card adapter |
| MC5141 | Memory card |
| Accesory modules |
| TA5300-CVR | Dummy cover, removable plastic part |
| TA5301-CFA | Cable fixing part |
| TA5211-TSCL-B | Screw terminal block |
| TA5211-TSPF-B | Spring terminal block |
| TA5212-TSCL | Screw terminal block |
| TA5212-TSPF | Spring terminal block |
| TA5220-SPF5 | Spring terminal block |
| TA5220-SPF6 | Spring terminal block |
| TA5220-SPF7 | Spring terminal block |
| TA5220-SPF8 | Spring terminal block |
| TA5220-SPF9 | Spring terminal block |
TYPE APPROVAL CERTIFICATE
No. ELE336523XG |
Enclosure - Page 7 of 7 |
AC500 / S500, AC500-XC / S500-XC, AC500-S / AC500-S-XC
AC500-eCo / S500-eCo, AC700F / S700F
|
Documents:
Catalogue: 1SBC125003C0205 (2012); 2CDC125080M0201 (2009);
Drawing No. 1SAP140160F0001; 1SAP140160F9001
Data sheets: - CPUs Types PM56xx, PM57x, PM58x and PM59x; Digital/Analog Input/Output Module DA501, DO526; CM5610-2RS;
CM5640-2ETH; CM582; PM50xx; TA5101; TA5105; TA5110; TA5120-2AI-UI; TA5123-2AI-RTD; TA5126-2AO-UI; TA5130; TA5141;
TA5142-RS485(I); TB56xx; TU515,TU516,TU542; TU531,TU532;
Part lists: 1SAP112300R0277; 1SAP117000R0271; 1SAP117200R0271; 1SAP150100R0277; 1SAP155500R0279;
- 1SAP170902R0101; 1SAP172900B0011; 1SAP172900R0111; 1SAP173200R0001; 1SAP173700B0001;
- 1SAP173800R0001; 1SAP240700R0001; 1SAP250800R0001; 1SAP260400R0001; 1SAP351500R0279;
- 1SAP372900B0011; 1SAP372900R0111; 1SAP373200R0001; 1SAP373700B0001; 1SAP373800R0001;
- 1SAP440700R0001; 1SAP450800R0001;
Test reports:
PACONSULT GmbH: - 0790-05 dated 02 June 2005; 1094-05 dated 27 July 2006; 09-2475B dated 06 July 2009;
11-3684 dated 19.08.2011; 12-4737, Rev.1; 16-7720 dated 10 June 2016; 18-10585, Rev. 2, dated 17.09.2018
EMV Rhein-Neckar GmbH: - 3893-365 dated 26/06/2006; 3893-384 dated 14/02/2009; 3893-385e dated 25/04/2009;
- 3893-386e dated 16/05/2009; 3893-388e dated 01/06/2009; 3893-390e dated 01/06/2009; 3893-391 dated 22/06/2009;
- 3893-392e dated 27/06/2009; 3893-395a dated 06.11.2009; 3893-399 dated 21.07.2010; 3893-3105 dated 26.09.2011;
- 3893-3113a dated 19.12.2012; 3893-3114 dated 19.07.2013; 3893-3116a dated 07.10.2014; 3893-3117 dated 23.09.2014;
- 3893-3119 dated 13.06.2015; 3893-3121 dated 24.06.2016; 3893-3132a dated 19.09.201; 3893-3127 dated 06.11.2018; 3893-3128 dated 06.11.2018;
TÜV Süd: - Z10 13 01 83652 001, dated of 2013-02-01
Xiamen Products Quality Supervision & Inspection Institute: - 2010H_W032
CESI Laboratory: - SEC12-0456WM-E-E1 and -E2; SEC13-0728WM-E-E2; SEC13-1473WM-E-E2; SEC13-1475WM-E-E2;
ABB: D2011042, dated 24.10.2011
Nemko: 450318-035TRFEMC; 450318-036TRFEMC; 450318-037TRFEMC; REP018506TRFEMC; REP018508TRFEMC;
Additional Place of Production:
Welco Wongs TECHNOLOGY (SHENZHEN) LTD.
WANFENG INDUSTRIAL ESTATE,
34 THE EAST OF WANZHANG PU,
SHAJING, BAOAN, SHENZHEN,
GUANGDONG,
P.R. CHINA |
|
Remarks:
Each particular application/ installation and the user operating software is to be specifically approved in conjunction with the relevant system in which the units are being used.
EC-Code: 31 and 41 (for XC-option only).
The equipment described on this certificate is approved for installation in power distribution zone.
Installation on board is to be provided taking into account of the additional requirements when listed in the relevant reports
( eg. EMC power supply filtering , shielded enclosure , appropriate grounding, etc. ).
This certificate replace the previous certificate ELE312019XG/001. |
|