MED094723CS!005ENGD- -  -  N- B15 CEILING WET UNIT -N- S- S- -20/10/2023- Marine Equipment- - SN- S- - N-  - 290,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED094723CS/005- N-Oct 19, 2028290487
 
Form
  Marine Equipment(TO)
Certification N. MED094723CS/005 - (ENG)
Certificate date 20/10/2023
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model or Denomin.
Items
B15 CEILING WET UNIT
Applicant MARINE INTERIORS CABINS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/05/2023
Expire date 19/10/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED094723CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B15 CEILING WET UNIT
Applicant MARINE INTERIORS CABINS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 20, 2023
October 19, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED094723CS/005
Page 1 of 2

Product description



Ceiling composed of panels having maximum length of 1500 mm and maximum width of 600 mm. The panels are composed of a mineral wool layer sheathed with glass cloth type Paroc Marine Slab 180+N5 having density of 180 kg/m3 and thickness of 35 mm laid, on the joints, upon “omega” shaped steel profiles, filled with the same mineral wool, having thickness of 1 mm and length of 90 mm. The panel joints are composed of steel profiles, 0.8 mm thick and having length of 60 mm, with bent edges, fitted on the side not exposed to the fire and screwed (screws 4.8x22 mm and pitch 300 mm) to the “omega” shaped steel profiles. Between the two profiles a layer of insulating material type Firemaster 607 Blanket, 13 mm thick and having density of 128 kg/m3, is fitted. On the perimeter edges, the mineral wool panels are laid upon C shaped steel profiles, 1 mm thick and having width of 40 mm.
Field of application

Fire resisting B-15 Class ceiling.

Reference documents

Santarossa SpA drawing No. 24pc00162 dated 3 November 2008 approved on 6 November 2008 with endorsement No. LABS-184.

Tests carried out

Tests as per RINA Test Laboratory report No. 2008CS014279 issued on 10 November 2008 according to Resolution IMO A.754(18).




ATTACHMENT TO
CERTIFICATE No. MED094723CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****