MED094723CS!007ENGD- -  -  N- B15 CEILING WET UNIT WITH ACCESSORIES -N- S- S- -15/12/2023- Marine Equipment- - SN- S- - N-  - 290,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED094723CS/007- N-Dec 14, 2028290487
 
Form
  Marine Equipment(TO)
Certification N. MED094723CS/007 - (ENG)
Certificate date 15/12/2023
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model or Denomin.
Items
B15 CEILING WET UNIT WITH ACCESSORIES
Applicant MARINE INTERIORS CABINS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/5/2023
Expire date 14/12/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED094723CS/007

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B15 CEILING WET UNIT WITH ACCESSORIES
Applicant MARINE INTERIORS CABINS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 15, 2023
December 14, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED094723CS/007
Page 1 of 2

Product description



Ceiling composed of panels having maximum length of 1500 mm and maximum width of 600 mm certified by RINA on B-15 Class with Certificate No. MED094723CS/005 dated 20 October 2023. The ceiling may be fitted with a steel box and a steel duct. The box, composed of a steel sheet 1 mm thick, is 100 mm high, its dimensions are 300 x 300 mm and is insulated in the inside with a mineral wool layer type Paroc Fire Slab 180 + N5, 25 mm thick and having density of 180 kg/m3. The duct, having external diameter of 177 mm, is composed of a steel sheet, 1 mm thick, and is insulated in the inside with the same mineral wool. The box and the duct are fixed to the ceiling by means of steel angles, 1 mm thick and having dimensions of 30 x 30 mm, screwed to the accessories and to the ceiling joints.
Field of application

Fire resisting B-15 Class ceiling with accessories.

Reference documents

Santarossa SpA drawing No. 24PC00166.01 rev. 1 dated 19 December 2008 approved on 7 January 2009 with endorsement No. LABS-204.

Tests carried out

Tests as per RINA Test Laboratory report No. 2008CS015842/2 issued on 7 January 2009 according to Resolution IMO A.754(18).




ATTACHMENT TO
CERTIFICATE No. MED094723CS/007
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****