DIP263125CSBIL- -  -  N- DISTITRON VE102V9 -N- S- S- -22/01/2026- Prodotti per nautica diporto- - NN- N- Stefano Moscatelli- N-  - 97,531Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP263125CS- N-Jan 21, 202997531
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP263125CS - (BIL)
Certificate date 22/01/2026
Product Resine

Model or Denomin.
Items
DISTITRON VE102V9
Applicant POLYNT SPA
Place of requester VIA DEL PRUNETO 40  %  52027 SAN GIOVANNI VALDARNO (AR)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive NONE
Standards Rules for the type-approval of components of composite materials intended for hull construction (NC/C.24 - ed. 01/01/1997)
Expire date 21/01/2029
Responsible Office Viareggio
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP263125CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Resine
Description Resins
Tipo DISTITRON VE102V9
Type
Norme di riferimento Rules for the type-approval of components of composite materials intended for hull construction (NC/C.24 - ed. 01/01/1997)
Reference standards Rules for the type-approval of components of composite materials intended for hull construction (NC/C.24 - ed. 01/01/1997)








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a Viareggio il 22  Gennaio  2026.  Questo Certificato è valido fino al 21 Gennaio 2029
   
Issued in Viareggio  on January 22, 2026. This Certificate is valid until January 21, 2029
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP263125CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
DISTITRON VE102V9



Documenti di riferimento



Reference documents
Specifiche tecniche depositate presso la Direzione Generale del RINA. Test report archiviato con pratica nr. RS/2025/CS/01/2631.

Technical specification deposited at RINA Head Office. Test report filed with job nr. RS/2025/CS/01/2631.


Campo di applicazione



Field of application
Costruzione di laminati e parti strutturali di scafi in plastica rinforzata con fibra di vetro, nei limiti previsti dai pertinenti Regolamenti del RINA.

Construction of laminates and structural parts of vessels in G.R.P. at conditions of the relevant RINA Rules.


Condizione di accettazione




Acceptance conditions
Le resine devono essere conservate ed impiegate secondo le indicazioni del fabbricante. Gli estremi del presente certificato dovranno essere riportati sui contenitori delle resine prodotte.

Resins have to be stocked and used following the instructions of the manufacturer. The number and the date of this certificate shall have to be marked on the drums of the resins.
Note :
Varianti alle resine omologate

Remarks :
Variants to type - approved resins
Distitron VE102


  Viareggio  22 Gennaio 2026 
 Viareggio January 22, 2026
**** NOTICE: This is NOT an official certificate ****