FAB360125XT!001ENG- -  -  N- Q2a and Q3a Stud Link Chain Cables -N- S- S- -19/12/2025- Fabbricanti Approvati- - SN- N- - S-  - 838,353BFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB360125XT/001- N-Dec 19, 2030838353
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB360125XT/001 - (ENG)
Certificate date 19/12/2025
Type Approvazione di fabbricanti di materiali
Product Catene per ancora con traversino ed accessori

Model or Denomin.
Items
Q2a and Q3a Stud Link Chain Cables
Applicant EVREN ZINCIR IMALAT MAKINA SAN.VE TIC. A.S.
Place of requester GEBZE GUZELLER ORG. SAN. BOL. NURSULTAN NAZARBAYEV SK. N:21  %  41400 KOCAELI  % TURKEY
Tel. N.,Fax, Email +90 262 751 4130, +90 262 751 4134, evren@evrenzincir.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 19/12/2030
Responsible Office ISTANBUL
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB146120XT/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Stud link anchor chain cables and accessories
Type Q2a and Q3a Stud Link Chain Cables
Applicant EVREN ZINCIR IMALAT MAKINA SAN.VE TIC. A.S.
GEBZE GUZELLER ORG. SAN. BOL. NURSULTAN NAZARBAYEV SK. N:21
41400 KOCAELI
TURKEY
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until December 19, 2030
_________________________________
RINA Services S.p.A.
Özgür Yilmaz
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB146120XT/001
Enclosure - Page 1 of 1
Q2a and Q3a Stud Link Chain Cables

APPROVAL CONDITIONS


Chemical composition (%):
- Grade Q2a: C < 0,24; Mn < 1,60; Si 0,15-0,55; S and P < 0,035; Al < 0,020;
- Grade Q3a: C < 0,30; Mn < 1,90; Si 0,15-0,35; S and P < 0,040; Al < 0,065;

Chain max. diameter:
- Grade Q2a: 81 mm;
- Grade Q3a: 81 mm;

Condition of supply:
- Grade Q2a: Normalized;
- Grade Q3a: Quenched and tempered;

Note: Raw material to be supplied by approved manufacturer.

Survey condition: All chain cables and accessories to be used on ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

ISTANBUL December 19, 2025
**** NOTICE: This is NOT an official certificate ****