MED489522CS!003ENGB- -  -  N- PANNELLO A30 PNF17 -N- S- S- -16/12/2022- Marine Equipment- - SN- S- - N-  - 244,549B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED489522CS/003- N-Nov 30, 2027244549
 
Form
  Marine Equipment(TO)
MED489522CS/003
Certification N. MED489522CS/003 - (ENG)
Certificate date 16/12/2022
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
PANNELLO A30 PNF17
Applicant NAVAL SUPPLIERS SRL
Place of requester ZONA INDUSTRIALE 24  %  33049 SAN PIETRO AL NATISONE (UD)  % ITALY
Tel. N.,Fax, Email 0432 727860, 0432 727886, firedoors@navalsuppliers.com
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 15/12/2022
Expire date 30/11/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED489522CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type PANNELLO A30 PNF17
Applicant NAVAL SUPPLIERS SRL
ZONA INDUSTRIALE 24,33049 SAN PIETRO AL NATISONE (UD),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 16, 2022
November 30, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED489522CS/003
Page 1 of 2

Product description

Steel bulkhead composed of panels, having maximum height of 2587 mm, consisting of two steel sheets 1.2 mm thick each and, in between, a layer of mineral wool, named SEAROX SL470 having thickness of 50 mm and density of 180 kg/m3. The mineral wool is glued to the steel sheets by means of 250 g/m2 of adhesive type AD 1670 V1. The panel joints consist of shaping of the steel sheet edges, relevant restrain and fixing by means of screws fitted on both side with pitch of 450 mm. The panel shape permits to obtain staggered joints and panel faces having maximum width, alternate, of 895 mm on one side and, on the other side, this width decreased of 127 mm.
Field of application
Fire resistant A-30 lightweight Class bulkhead for general application.
Reference documents
Naval Suppliers drawing No. FT-WP-T2509-R00 dated 19 October 2017 approved on 30 November 2017 with endorsement No. LABS-1574.
Tests carried out
Test as per RINA Test Laboratory report No. 2017CS013521/1 issued on 30 November 2017 according to IMO 2010 FTP CODE Part 3.




ATTACHMENT TO
CERTIFICATE No. MED489522CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****