ENGGN06/12/2022
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED373722WS
Certificate date 12/6/22
Type Prevenzione dell'inquinamento marino
Directive (EU) 2022/1157
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº MED/2.10
Model ZEPT-DeSOx-Uae-150-O
Identification S/N.: ZEPT-P-22015, on M/V: DELOS (IMO 9585601, RI 86851)
Applicant JIANGSU ZHENHUA ENVIRONMENTAL PROTECTION TECHNOLOGY CO., LTD.
Place of requester No.568 Wujin Road,  Jiangyan Economico Development Zone Taizhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards IMO Res. MEPC.340(77)
Specified IMO Res. MEPC.176(58) - (Revised MARPOL Annex VI, Reg.4) and  IMO Res. MEPC.259(68)
Surveyor RAO Wurui
Responsible Office RINA China Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED373722WS

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Marine-Pollution prevention requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2022/1157.
MED Item Nº MED/2.10
Description On board exhaust gas cleaning systems
Type ZEPT-DeSOx-Uae-150-O
Identification S/N.: ZEPT-P-22015, on M/V: DELOS (IMO 9585601, RI 86851)
Applicant JIANGSU ZHENHUA ENVIRONMENTAL PROTECTION TECHNOLOGY CO., LTD.
No.568 Wujin Road, Jiangyan Economico Development Zone Taizhou (Jiangsu)
CHINA
Testing standards IMO Res. MEPC.340(77)
Reference standards IMO Res. MEPC.176(58) - (Revised MARPOL Annex VI, Reg.4) and  IMO Res. MEPC.259(68)
    
Issued in SHANGHAI 
on December 6, 2022

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /22
 

________________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED373722WS

Verified components of the equipment (with serial number)
S/N.: ZEPT-P-22015, on M/V: DELOS (IMO 9585601, RI 86851)
Technical documentation
1, Following statutory document have been approved/filed in compliance with IMO Res. MEPC.340(77):
1.1 Onboard Monitoring Manual (OMM), SHMC/22671;
1.2 Technical Manual, Scheme B (ETM-B), SHMC/22649 ;
1.3 SOx Emission Compliance Plan, Scheme B (SECP), SHMC/22731;
1.4 EGC Record Book, SHMC/22653;
1.5 Electrical Wiring Diagram, SHEL/13495;
1.6 Piping and Instruments Diagram, SHMC/21651
1.7 Alarm Point List, SHEL/13424
1.8 Scrubber Discharge Water PH Value CFS Report, SHMC/21844

2. Product description:
-The EGC unit from Jiangsu Zhenhua Environmental Protection Technology Co., Ltd, referred to as a scrubber, is based on the wet scrubbing technology. This particular system uses the surrounding seawater as wash water, which is discharged once through, that it is described as an open system. -The entire monitoring system is designed according to MARPOL Annex VI, and IMO Resolution MEPC.340(77). A continuous stream of exhaust gas is extracted from the funnel after the EGC unit. The sample probe draws in the sample stream which is led to the conditioning cabinet via a heated sample line, where it is filtered and dehumidified before it is sent to the gas analysor. The analysor measures the SO2 and CO2 from where the Emission Ratio (ER) can be calculated. The measurements are logged every 4.76 seconds (the required interval is every 285 second).

3.Completed Tests on board were carried out and witnessed by RINA surveyor from 18/11/2022 to 20/11/2022 in accordance with IMO Res. MEPC.340(77) & approved documents, and relevant testing reports/ records are listed as below:
1. Sea trial procedure and EGCS test record;
2. Bunker Delivery Notes;
3. Rina certificate for Air Receiver;
4. FAT report for Electrical Control System.
5. Manufacturer Certificate for EGCS Tower Body
6. Rina Certificate for Sea Water Pump including Motor.
7. Type Approve certificate of CEMS issued by BV;
8. Type Approve certificate of WMS issued by BV;
9. FAT report for Centrifugal Air Fans;
10.Wash water sample nitrate analyses report from laboratory.

Limitation on the acceptance or use of the product
Max. Exhaust Mass Flow Rate is 146,500 kg/h.
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****