MED511525CS!038ENG- -  -  N- 325A60_G_#1660_0 -N- S- S- -08/01/2026- Marine Equipment- - SN- S- - N-  - 2,372,775B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/038- N-Jan 7, 20312372775
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/038 - (ENG)
Certificate date 08/01/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
325A60_G_#1660_0
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO Res.MSC.5(48)-(IGC Code) 3,SOLAS 74 Reg. II-2/9
Expire date 07/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/038

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type 325A60_G_#1660_0
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO Res.MSC.5(48)-(IGC Code) 3; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
January 8, 2026
January 7, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/038
Page 1 of 2

Product description

Window composed of three or more panes having, each, maximum clear size of 1460 mm in width and 2440 mm in height. The glass compound is composed of pane type CONTRAFLAM A60 (manufacturer Vetrotech) having total thickness of 27 mm and composed of three glasses having, each, thickness of 8 mm and, in between, two layers of intumescing gel 1,5 mm thick each, a void space 14 mm thick, and one toughened pane 6 mm thick (manufacturer Vetrotech), a void space 14 mm thick, and a grey tempered pane having total thickness of 23,52 mm. The central mullions are composed, moving from the CONTRAFLAM A60 pane, of a square steel pipe having dimensions of 100x100 mm and thickness of 5 mm welded to a steel plate, 20 mm thick and having width of 90 mm; the plate is bolted, by means of M6 screws, to the glass retaining frame composed of a stainless steel plate having width of 120 mm and thickness of 5 mm. The square pipe is insulated with a layer of material named FireMaster Marine Plus Blanket, 40 mm thick and having density of 70 kg/m3. The frame is composed of a stainless steel plate welded on the bulkhead, having width of 90 mm and thickness of 20 mm bolted, by means of M6 screws, to an L shaped stainless steel profile having dimensions of 120x97 mm and thickness of 5 mm. Between steel plate and L profile is fitted a calcium silicate spacer type Promatec H having dimensions of 20x10x150 mm and density of 870 kg/m3. Between the glass faces, the frame, the glass retaining frame and the mullions, gaskets of Kerafix 2000 Blanket, 13 mm thick and having density of 64 kg/m3, and intumescent gasket type Roku Strip having dimensions of 20x1,5 mm are fitted while between L shaped profile and the bulkhead a ceramic fiber cord 1000 stiffened inconel having diameter 8 mm is fitted.

Field of application
Fire resistant A-60 Class window with fire hazard in the inner side of the application and on the side with the glass type CONTRAFLAM A60. Hose stream resistant.

Reference documents
METALSIGMA TUNESI drawing No. 1478-3 T001 Rev. 0 dated 27 September 2019 approved on 22 November 2019 with endorsement No. LABS-1939.
Tests carried out
Test as per RINA Test Laboratory Reports No. 2019CS012477/3 dated 6 February 2020 according to IMO 2010 FTP Code Part 3 and Appendix 2 - A.I. and paragraph 5.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/038
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****