MED149026CS!001ENGF- -  -  N- Class A60 fire-resistant rectangular window 124YS02-16-00J -N- S- S- -05/06/2026- Marine Equipment- - SN- S- - N-  - 2,335,224B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED149026CS/001- N-Jun 4, 20312335224
 
Form
  Marine Equipment(TO)
Certification N. MED149026CS/001 - (ENG)
Certificate date 05/06/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
Class A60 fire-resistant rectangular window 124YS02-16-00J
Applicant NANJING LISHUI YISHENG SHIP FITTINGS FACTORY
Place of requester ROOM 321,322,323, TECHNOLOGY ENTREPRENEURSHIP SERVICE CENTER, 688 TIANSHENGQIAO AVENUE, YONGYANG TOW Nanjing (Jiangsu)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO Res. MSC.5(48)-(IGC Code) 3,IMO MSC/Circ.1120
Request 26/02/2026
Expire date 04/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED149026CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type Class A60 fire-resistant rectangular window 124YS02-16-00J
Applicant NANJING LISHUI YISHENG SHIP FITTINGS FACTORY
ROOM 321,322,323, TECHNOLOGY ENTREPRENEURSHIP SERVICE CENTER, 688 TIANSHENGQIAO AVENUE, YONGYANG TOW Nanjing (Jiangsu),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO Res. MSC.5(48)-(IGC Code) 3; IMO MSC/Circ.1120
Issued in Genoa on
This Certificate is valid until
June 5, 2026
June 4, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED149026CS/001
Page 1 of 3

Product description

Rectangular window having maximum external size of 1650 mm (W) x 2350 mm (H) x 149 mm deep with round corner of R75 mm. The maximum clear light is 1500 mm (W) x 2200 mm (H) with round corner of R10 mm.
On the exposed side, the window main frame, composed of an “L” shaped steel profile having dimensions of 75x75 mm and 10 mm thick, is welded to the bulkhead. The window main frame is bolted (by means of bolts type M8 having a pitch of 180 mm) to the steel pressure frame having dimensions of 12x45 mm and provided with the holes for alignment with main frame and connection frame.
The steel window connecting frame is composed of a steel profile having dimensions of 34x15 mm provided with the holes for alignment with pressure frame (by means of M6 bolts with a pitch of 180 mm) and pressure plate (by means of M6 bolts with a pitch of 75 mm).
On the unexposed side the window frame is completed by the pressure plate composed of a steel profile having dimensions of 6x50 mm provided with the holes for alignment with connection frame.
The window pane is composed of a compound structure of toughened glass assembly named FJ-A60/YJ-A60, produced by Yixing Yushi Special Glass Co. Ltd, having dimensions of 1580 mm (W) x 2280 mm (H) x 61 mm thick with round corner of R10 mm and consists, from the exposed side, of a 15 mm thick toughened glass, a vacuum space of 12 mm, a 6 mm thick toughened glass, a 22 mm thick wet fireproof layer (gel type) and a 6 mm thick toughened glass.
The sealing between the glass pane and the pressure plate is made by a silicon rubber 5x20 mm (manufacturer Jiangyin Dingyan Seals Co., Ltd.). The sealing between the glass pane and the main frame is made by a silicon rubber 5 mm thick (manufacturer Jiangyin Dingyan Seals Co., Ltd.) and also a graphite expansion strip 10x2.5 mm (manufacturer Wuhu Garfo New Material Technology Co., Ltd.). The insulation between the glass pane and the connecting frame is made by ceramic wool named TG-II type (manufacturer Yixing Ocean Ship Material Co., Ltd.) having nominal density of 170 kg/m3. The insulation between the pressure frame and the main frame is made by a fireproof board named YB type (manufacturer Suzhou Youlian Ship Fitting Co., Ltd.) having nominal density of 1000 kg/m3.










 

ATTACHMENT TO
CERTIFICATE Nr. MED149026CS/001
Page 2 of 3


Field of application
Fire resistant A-60 Class window with fire hazard in the inner side of the application, on the side fitted with the main frame and, regarding the glass, on the side fitted with toughened glass 15 mm thick.

The certified item was not subjected to thermal radiation measurement during the fire resistance test in accordance with the requirement of Fire Test Procedure Code Part 3 Appendix 3 and this characteristic must be taken into account.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
Drawings enclosed to SGS-CSTC Standards Technical Services Co., Ltd Anji Branch report No. AJFT26000622R01-1_EN (Figure 1.1 ÷ Figure 1.7).
Tests carried out
Test as per SGS-CSTC Standards Technical Services Co., Ltd Anji Branch report No. AJFT26000622R01-1_EN issued on 11 May 2026 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED149026CS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****