MED583725CSENGD- -  -  N- SERIES 3201-PEGASUS and 3201-HYDRA ty. 01/C Lift Landing Doors in A-0 Class for Marine Installations - vers. 2014 (Hi.Per) -N- S- S- -18/01/2026- Marine Equipment- - SN- S- - N-  - 369,285B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED583725CS- N-Jan 17, 2031369285
 
Form
  Marine Equipment(TO)
Certification N. MED583725CS - (ENG)
Certificate date 18/01/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
SERIES 3201-PEGASUS and 3201-HYDRA ty. 01/C Lift Landing Doors in A-0 Class for Marine Installations - vers. 2014 (Hi.Per)
Applicant WITTUR S.P.A.
Place of requester VIA MACEDONIO MELLONI 12  %  43052 COLORNO (PR)  % ITALY
Tel. N.,Fax, Email 0521/3111, 0521/311200, Leonardo.Fontana@wittur.com
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Request 17/12/2015
Expire date 17/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED583725CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type SERIES 3201-PEGASUS and 3201-HYDRA ty. 01/C Lift Landing Doors in A-0 Class for Marine Installations - vers. 2014 (Hi.Per)
Applicant WITTUR S.P.A.
VIA MACEDONIO MELLONI 12,43052 COLORNO (PR),ITALY
Testing standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Issued in Genoa on
This Certificate is valid until
January 18, 2026
January 17, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED583725CS
Page 1 of 2

Product description

Lift landing door composed of two sliding leaves having maximum clear opening size of 1400 mm (W) and 2200 mm (H). Each leaf, having maximum height of 2275 mm and maximum width of 750 mm, is composed of a steel sheet with bent edges, 1.5 mm thick, and is fitted with two omega shaped steel stiffeners having dimensions of 120x70x30 mm and thickness of 1 mm tack welded to the steel sheet. The door frame is composed of ā€œCā€ shaped carbon steel profiles having thickness of 3 mm.

Field of application
Fire resistant A-0 Class double leaf sliding door with the fire hazard on the side opposite to the leaf sliding guides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.

In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested
- door used with a fire tested frame design
Reference documents
Wittur drawings No. 3214.34.0049 dated 21 December 2015 approved on 14 January 2016 with endorsement No. LABS-1198.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2015CS014026 issued, on 14 January 2016, according to IMO 2010 FTP Code Part 3 and to IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED583725CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****