MED517126CS!001ENGD- -  -  N- Rudder angle indicators:,IAB 17272 ,IAB 19696 ,IAB 20080,IAB 20100,IAB14444,Rudder angle resistive transmitters:,TAB 40234,TAB 40205 -N- S- S- -09/09/2026- Marine Equipment- - SN- S- - N-  - 516,926B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED517126CS/001- N-Sep 9, 2031516926
 
Form
  Marine Equipment(TO)
Certification N. MED517126CS/001 - (ENG)
Certificate date 09/09/2026
Type Apparecchi di navigazione
Product Rudder angle indicators
Item Nº MED/4.20
USCG Category N° 165.167

Model or Denomin.
Items
Rudder angle indicators:,IAB 17272 ,IAB 19696 ,IAB 20080,IAB 20100,IAB14444,Rudder angle resistive transmitters:,TAB 40234,TAB 40205
Applicant SAN GIORGIO S.E.I.N. SRL
Place of requester Via A. Pedullà  59 % 16165 Genova%ITALY
Tel. N.,Fax, Email 0108301222, 0108301278, ---
Directive (EU) 2026/1434
Standards EN 60945:2002 incl. IEC 60945 Corr. 1:2008 EN 61162 series,  EN 61162-1:2024, EN 61162-2:2024, EN 61162-3:2008+A1:2010+A2:2014,EN IEC 61162-450:2024,EN 62288:2022 incl. A1:2024,EN 62923-1:2018,EN 62923-2:2018,ISO 20673:2022
Reference Documents SOLAS Reg. V/18, V/19, X/3,IMO Res. A.694(17),IMO Res. MSC.36(63)-(1994 HSC Code) 13,IMO Res. MSC.97(73)-(2000HSC Code)13,IMO Res. MSC.191(79),IMO Res. 302(87)
Expire date 09/09/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Luigi Benedetti S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED517126CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/4.20
USCG Category Nº 165.167
Description Rudder angle indicators
Type Rudder angle indicators:
Applicant SAN GIORGIO S.E.I.N. SRL
Via A. Pedullà 59,16165 Genova,ITALY
Testing standards EN 60945:2002 incl. IEC 60945 Corr. 1:2008 EN 61162 series,  EN 61162-1:2024, EN 61162-2:2024, EN 61162-3:2008+A1:2010+A2:2014,EN IEC 61162-450:2024,EN 62288:2022 incl. A1:2024,EN 62923-1:2018,EN 62923-2:2018,ISO 20673:2022
Reference standards SOLAS Reg. V/18, V/19, X/3; IMO Res. A.694(17); IMO Res. MSC.36(63)-(1994 HSC Code) 13; IMO Res. MSC.97(73)-(2000HSC Code)13; IMO Res. MSC.191(79); IMO Res. 302(87)
Issued in Genoa on
This Certificate is valid until
September 9, 2026
September 9, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED517126CS/001
Page 1 of 2
Products description:

Rudder angle indicators,
models: IAB17272, IAB20080, IAB19696, IAB20100, IAB14444

Technical documents
San Giorgio S.E.I.N. Instruction manual n. M100914 rev. 3.0 (22/09/2025)
San Giorgio S.E.I.N. Description n. M100910 (release 21/05/2013)
Dwg. D110509, D110804, D100724, D100908.

Test report:
TesLab Report n.111003F (18/04/2011)


Rudder angle Resistive Transmitters
models: TAB 40234, TAB 40205

Technical documents
Dwg. 891109, M100910. D220211_R0.

Test report:
TesLab report n. 111004A (29/04/2011)


Remark: This certificate annuls and replaces the certificate No. MED369421CS/001 dated 09/09/2021




ATTACHMENT TO
CERTIFICATE No. MED517126CS/001
Pages  2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****