ENGGN23/07/2015
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED006215XF
Certificate date 7/23/15
Type Prevenzione dell'inquinamento marino
Directive 2013/52/EU
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº A.1/2.10
Model -
Identification 1.5045 intended for M/V FINNPULP IMO 9212644
Applicant ALFA LAVAL AALBORG NIJMEGEN
Place of requester POSTBUS 6664  %  6503 GD NIJMEGEN  % NETHERLANDS
Tel. N.,Fax, Email +31 24 35 23 100, +31 24 35 64 995, INFO@SMITGAS.NL
Standards IMO Res. MEPC.184(59)
Responsible Office HELSINKI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED006215XF

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/2.10
Description On board exhaust gas cleaning systems
Model Pure SOx 134 Multiple Inlet Open Loop Seawater  Scrubber System
Identification 1.5045 intended for M/V FINNPULP IMO 9212644
Applicant ALFA LAVAL AALBORG NIJMEGEN
POSTBUS 6664
6503 GD NIJMEGEN
NETHERLANDS
Testing standards IMO Res. MEPC.184(59)
    
Issued at Helsinki 
on July 23, 2015

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /15
 

________________________________________
RINA Services S.p.A. - Alexander Yakovishin
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED006215XF
Place of unit verification
Rauma,,

Verified components of the equipment (with serial number)
1.5045 intended for M/V FINNPULP IMO 9212644
Technical documentation
- PURESOX Functional Block Diagram
- Drawings Booklet: HMMC-5105 on 02 December 2014
- SOx Emission Compliance Plan (SECP-B): HMMC-5114 on 02 December 2014
- Technical Manual for Scheme B (ETM-B): HMMC-5112 on 02 December 2014
- Onboard Monitoring Manual (OMM-B): HMMC-5113 on 02 December 2014
- Exhaust Gas Cleaning Record Book : HMMC-5111 on 02 December 2014
- PH CFD Calculation: HMMC-5117 on 02 December 2014

Limitation on the acceptance or use of the product
- One exhaust gas cleaning system designed to use with two main engines in open loop. - Refer to the Site Acceptance Test Report dated 23.02.2015 Product description Exhaust Gas Cleaning System is multiple inlet open loop sea water scrubber system. It passes the exhaust gases from the combustion unit through sea water and gases are cleaned by sea water. The wash water absorbs the oxides of sulphur (mainly SO2) and particulates from the exhaust gas resulting from the combustion process. The wash water can be discharged to sea as long as discharge criteria are fulfilled.
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Alexander Yakovishin
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****