ENGGN20/03/2025
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED120924XT/001
Certificate date 3/20/25
Type Mezzi di salvataggio
Directive (EU) 2024/1975
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23
Model GD FFD 21Y
Identification 809
Applicant GURDESAN GEMI MAK SAN VE TIC A.S
Place of requester DILOVASI ORGANIZE SANAYI BOLGESI, 4.KISIM, D-4016 SOK., NO.1  %  41455 Gebze/Kocaeli  % TÜRKIYE
Tel. N.,Fax, Email +90 262 724 8546, +90 262 724 8554, info@gurdesan.com.tr
Standards IMO Res. MSC.81 (70), as amended
Surveyor Tolga Sali
Responsible Office RINA Turkey Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED120924XT/001

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type GD FFD 21Y
Identification 809
Applicant GURDESAN GEMI MAK SAN VE TIC A.S
DILOVASI ORGANIZE SANAYI BOLGESI, 4.KISIM, D-4016 SOK., NO.1
41455 Gebze/Kocaeli
TÜRKIYE
Testing standards IMO Res. MSC.81 (70), as amended
    
Issued in ISTANBUL 
on March 20, 2025

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /25
 

________________________________________
RINA Services S.p.A. - Devrim Kacar
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED120924XT/001
Place of unit verification
ISTANBUL,,

Verified components of the equipment (with serial number)
809
Technical documentation
Approved Dwgs: ISST/15511, ISEL/8292
Test report issued on ( Ref.Nr. AB.24.25, AB.24.25-2, AB.24.25-3, AB.24.25-4, Nr. AB.24.072, Nr. AB.24.016) in accordance with Resolution MSC. 81(70) as amended and LSA Code.

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg, List: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Devrim Kacar
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****