MED403023WSENGD- -  -  N- YGM-1100-TC -N- S- S- -10/10/2023- Marine Equipment- - SN- S- - N-  - 1,139,445B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED403023WS- N-Oct 9, 20281139445
 
Form
  Marine Equipment(TO)
Certification N. MED403023WS - (ENG)
Certificate date 10/10/2023
Type Mezzi di salvataggio
Product Materiali retroriflettenti
Item Nº MED/1.30

Model or Denomin.
Items
YGM-1100-TC
Applicant ZHEJIANG YGM TECHNOLOGY CO., LTD.
Place of requester No.2355 Haifeng Road, Binhai Economic Zone, Jiaojiang District % Taizhou City, ZheJiang, China
Tel. N.,Fax, Email 86-13738587909, 86-576-88123899, ygm025@cnygm.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1628.
Request 2021/08/23
Expire date 09/10/2028
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED403023WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.30
Description Retro-reflective materials
Type YGM-1100-TC
Applicant ZHEJIANG YGM TECHNOLOGY CO., LTD.
No.2355 Haifeng Road, Binhai Economic Zone, Jiaojiang District,Taizhou City, ZheJiang, China
Testing standards IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
October 10, 2023
October 9, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED403023WS
Page 1 of 2

Product Description

“YGM-1100-TC” is a Retro-reflective Material with below specification:
- Type II: Highly weather-resistant materials for continuous outdoor exposure.
- Material with support.
- Pressure Sensitive Adhesive Type.
Type
YGM-1100-TC
Figure of Surface
Hexagonal Honeycomb Form
Tensile Strength
Longitudinal ≥ 330 N per 25 mm
Transverse ≥ 200 N per 25 mm

Application/Limitation
The Retro-reflective Materials shall be fitted on lifesaving appliances in accordance with the LSA Code and IMO Res. MSC.481(102) Annex 1.

Reference Documents
Technical Drawings and Manuals are approved and filed by RINA as listed on Approval letter No.: SHFP/2023/789/SQN.

Tests Carried Out
Tested According to IMO Resolution MSC.481(102) Annex 2:
- Test Report No.: 2023038 (RINA Ref No.: SHFP-24664)
- Test Report Date: 2023-07-06
- Laboratory: Wuhan Testing Center of Marine Life Saving Appliances
- Test Address: No.128 Lujiaoting Xinlu, Qiaokou District, Wuhan, Hubei Province, China

Routine Test witnessed by RINA Surveyor.


- Test Report No.: YGM/QR81-202301, 2023001
- Test Report Date: 2023-09-02 (RINA Ref No.: SHFP-24656)
- Laboratory: Zhejiang YGM Technology Co., Ltd Laboratory.
- Test Address: No.2355 Haifeng Road, Economic Development Area, Jiaojiang District, Taizhou City, Zhejiang, China.

Marking of Product
The product is to be indelibly marked with name of manufacturer, type designation and date of
manufacture. The marking shall be according to LSA Code, item 1.2.2.9.




ATTACHMENT TO
CERTIFICATE No. MED403023WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****