MED074926WSENGF- -  -  N- NFH-75 -N- S- S- -07/04/2026- Marine Equipment- - SN- S- - N-  - 1,036,901B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED074926WS- N-Apr 6, 20311036901
 
Form
  Marine Equipment(TO)
MED364026WS/001,MED550026WS,MED625026WS/002,MED747926WS/003,MED902026WS/002
Certification N. MED074926WS - (ENG)
Certificate date 07/04/2026
Type Mezzi di salvataggio
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23

Model or Denomin.
Items
NFH-75
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
Place of requester No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Tel. N.,Fax, Email 0576-89053360, 0576-89053363, nsy888@norsier.com
Directive (EU) 2025/1533
Standards IMO Res.MSC 81(70) as amended
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 06/04/2031
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED074926WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type NFH-75
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City, Zhejiang Province, China
Testing standards IMO Res.MSC 81(70) as amended
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANG HAI on
This Certificate is valid until
April 7, 2026
April 6, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED074926WS
Page 1 of 2

TECHNICAL DATA


Product Description:

- Maximum Working Load: 75 kN


- Maximum Hoisting Load: 50 kN
- Minimum Launching Load: 40 kN
- Minimum Breaking Load of Wire Rope, MBL = 235 kN
- Wire Rope Diameter = 18 mm

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-62129 NFH-75 75kN Free-fall lifeboat launching appliance (SHST/2026/215/LEIGU); SHST-63685 NFH-75 Davit related to steel wire modify (SHST/2026/682/LEIGU).



TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing of RINA as per Prototype Test Report dated on 03/Apr./2026.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.
Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.




ATTACHMENT TO
CERTIFICATE No. MED074926WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****