MED556324WS!001ENGF- -  -  N- DW34HA-S -N- S- S- -06/12/2024- Marine Equipment- - SN- S- - N-  - 1,178,597B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED556324WS/001- N-Dec 5, 20291178597
 
Form
  Marine Equipment(TO)
MED692324WS/001
Certification N. MED556324WS/001 - (ENG)
Certificate date 06/12/2024
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Item Nº MED/1.41a

Model or Denomin.
Items
DW34HA-S
Applicant ZHENJIANG DH MARINE EQUIPMENT CO., LTD.
Place of requester No.98 Angang Road, Dagang, Zhenjiang City, Jiangsu Province, China
Tel. N.,Fax, Email 0511-84318690, 0511-84318689, tech01@dhmarine.cn
Directive (EU) 2024/1975
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS '74 Convention, as amended - Regulation III/4, III/16, III/23, III/24, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Expire date 05/12/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED556324WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.41a
Description Winches for survival craft and rescue boats: (a) davit-launched lifeboats
Type DW34HA-S
Applicant ZHENJIANG DH MARINE EQUIPMENT CO., LTD.
No.98 Angang Road, Dagang, Zhenjiang City, Jiangsu Province, China
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS '74 Convention, as amended - Regulation III/4, III/16, III/23, III/24, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
December 6, 2024
December 5, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED556324WS/001
Page 1 of 2
TECHNICAL DATA

Product Description:
- Maximum Working Load, MWL = 34 kN
- Maximum Hoisting Load = 24 kN
- Wire rope diameter = 16 mm
- Breaking load of wire rope = 148 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS

Technical Documents and Report approved and filed by RINA listed on Approval drawings and letter No.: SHST-53401 DW34HA Rescue Boat & Raft Winch (SHST/2024/1698/LEIGU) / SHST-54751 Application Form for DW34HA Winch / SHST-53400 Risk assessment for DW34HA Winch (SHST/2024/1696/LEIGU) / SHST-54561 DW34HA-S Winch Prototype Test Report (SHST/2024/1815/LEIGU).
TESTS CARRIED OUT
In accordance with IMO Resolution MSC.81(70) as amended, as per test report filed with SHST-54561.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED556324WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****