MED122124CSENGD- -  -  N- APISHIELD -N- S- S- -11/04/2024- Marine Equipment- - SN- S- - N-  - 379,415B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED122124CS- N-Apr 10, 2029379415
 
Form
  Marine Equipment(TO)
Certification N. MED122124CS - (ENG)
Certificate date 11/04/2024
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c
USCG Category N° 164.117

Model
Items/Sizes
APISHIELD
Applicant API SPA
Place of requester Largo Guido Donegani 2  %  20121 Milano (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 13/03/2024
Validity 10/04/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED122124CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.18c
USCG Category Nº 164.117
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type APISHIELD
Applicant API SPA
Largo Guido Donegani 2,20121 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 11, 2024
April 10, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED122124CS
Page 1 of 2

Product description


Floor covering composed of water-based product, with acrylic and polyurethane resins.
- mass per area (g/m2) 30 ± 5
- thickness (mm) 0.01 ± 0,001

The material may also be produced by:
· API SpA, Regione San Marco 7 - 07041 Alghero - SS - ITALY.
· Stonhard, 7 Esterbrook Lane - Cherry Hill - NJ 08003 - USA.
· Stonhard, 1000 E. Park Ave. - Maple Shade - NJ 08052 - USA.
Field of application

As floor covering.
The product may be applied to any metallic support, any non-combustible support and any material having low flame spread characteristics.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out


Tests as per RINA Test Laboratory report No. 2024CS011221 dated 11 April 2024, issued according to:
  • IMO 2010 FTP Code Part 5




  • ATTACHMENT TO
    CERTIFICATE No. MED122124CS
    Pages 2 of 2
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Enrico Cabella
    **** NOTICE: This is NOT an official certificate ****