ENGGS07/10/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED118009SH/003
Certificate date 10/7/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi per la messa a mare dotati di paranchi e verricelli
Item Nº A.1/1.21
Model SAC21
Identification SAC21343
Intend For Hull-XL124
Manufacturer JIANGYIN CITY BEIHAI LSA CO., LTD.
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Place of production 332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
Place of requester 332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Surveyor YiFeng Cheng



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED118009SH/003

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall and winch (davits)
Model SAC21
Identification SAC21343
Intend For Hull-XL124
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued at Genoa 
on October 7, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED118009SH/003
Manufacturer:
JIANGYIN CITY BEIHAI LSA CO., LTD.
Address
332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA

Verified components of the equipment (with serial number)
SAC21343
Intend For Hull-XL124
Technical documentation
Test report issued by RINA on 28th July, 2009 ( n.SAC21343) in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Drawing as followings:
 215BH-30-00SM                          Instruction
 215BH-30-00JS         Calculation Instruction of Designing
 215BH-00LH    Physicochemical Properties of Mmaterial For Main Parts
 215BH-30-00YYL      Schematic Drawing of Hydraulic System
 215BH-30-00                     General Arrangement
 215BH-30-01-0         Base
 215BH-30-02-0        Slewing Tray
 215BH-30-05-0                Hoisting Device
 215BH-30-05-01-0    Reduction Gear Case Set
 215BH-30-05-01-0    Body Case   
 215BH-30-05-02-0 Speed Limited Clutch Device
 215BH-30-05-03-0    Remote Control Drum       
 215BH-30-05-04-0 Handle Unit       
 215BH-30-05-05-0 Drum
 215SH-30-06-0         Jib      
 215SH-30-08-0                     Limit Unit
 215SH-30-09-0                     Head Tackle
 215SH-30-10                      Hoisting Fall Unit
 215SH-30-11-0         Head Tackle
 215SH-30-12-0                Hoisting Limit Unit
 215SH-30-16-0                Slewing Limit Unit
 215SH-30-18-0         Crane
 215SH-30-21           Ring
 215SH-30-22     Triangle Plate





                               ATTACHMENT FOR
                   CERTIFICATE Nr. MED118009SH/003
  

              
  Maximum lowering load: 21kn
  Hoisting load: 14kn
  Minimum lowering noad: 5.2kn
  Slewing load: 14kN
  Hoisting speed: ≥18m/min
  Lowering speed: 40~60m/min
  Slewing Radius: 5.0 meter
  Slewing angle of electric motor: ≤330 deg
  Slewing angle of accumulator:>110 deg
  Steel wire dimension: 18 x 19 + FC-16mm
  Hydraulic system working pressure: 15.5 Mpa

Limitation on the acceptance or use of the product
Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****