FAB005923CFENG- -  -  N- CARBON AND ALLOY STEELS -N- S- S- -04/10/2023- Fabbricanti Approvati- - SN- N- - S-  - 0BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB005923CF- N-Sep 10, 20280
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB005923CF - (ENG)
Certificate date 04/10/2023
Type Approvazione di fabbricanti di materiali
Product Fusi in acciaio per valvole

Model or Denomin.
Items
CARBON AND ALLOY STEELS
AUSTENITIC AND DUPLEX STAINLESS STEELS,,NICKEL ALLOYS
Applicant VEEYES ALLOYS PRIVATE LIMITED
Place of requester 518/ 1A & 1B, SARAVANAMPATTI THUDIYALUR ROAD VELLAKINAR POST  %  641 029 Coimbatore (Tamil Nadu-33)  % INDIA
Tel. N.,Fax, Email 422 2669992, 422 2669991, senthil.m@veeyes.co.in
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents -
Expire date 10/09/2028
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB005923CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel castings for valves
Type CARBON AND ALLOY STEELS
AUSTENITIC AND DUPLEX STAINLESS STEELS,NICKEL ALLOYS
Applicant VEEYES ALLOYS PRIVATE LIMITED
518/ 1A & 1B, SARAVANAMPATTI THUDIYALUR ROAD VELLAKINAR POST
641 029 Coimbatore (Tamil Nadu-33)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents -
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 10, 2028
_________________________________
RINA Services S.p.A.
Aswin Palliath
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB005923CF
Enclosure - Page 1 of 1

APPROVAL CONDITIONS



Product Description: Carbon and alloy steels; Austenitic and duplex stainless steels; Nickel based alloys

Casting Method: Sand Casting and Centrifugal Casting Process

Casting Weight: 2000 kg maximum.

Delivery condition: Unmachined & Machined, Heat Treatment as applicable

Application: The range of products include gate, globe, check, butterfly, plug, control valves, nominal bore ranging from 1" to 44" (25 to 1117mm) and pressure rating from 150 psi to 9000 psi

Survey conditions: All castings to be used for construction of ships classed with RINA are to be in compliance with the requirements of the RINA Rules and are to be tested accordingly.



General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA India Marine 04-10-2023
**** NOTICE: This is NOT an official certificate ****