MED370023CS!001ENGD- -  -  N- SOMEC FRP P 007 -N- S- S- -18/10/2023- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED370023CS/001- N-Oct 8, 2028162855
 
Form
  Marine Equipment(TO)
Certification N. MED370023CS/001 - (ENG)
Certificate date 18/10/2023
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
SOMEC FRP P 007
Applicant SOMEC SRL
Place of requester VIA PALÙ 30 ZONA INDUSTRIALE  %  31020 ZOPPE' DI SAN VENDEMIANO (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471806, info@somecgroup.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 16/10/2018
Expire date 08/10/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED370023CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type SOMEC FRP P 007
Applicant SOMEC SRL
VIA PALÙ 30 ZONA INDUSTRIALE,31020 ZOPPE' DI SAN VENDEMIANO (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 17, 2023
October 8, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED370023CS/001
Page 1 of 2

Product description

Bulkhead consisting of maximum three panels having, each, maximum height of 2400 mm and maximum width of 650 mm. Such panels are composed of one steel sheet, 2 mm thick, and one layer of mineral wool with aluminium foil (certified non combustible in conformity to the requirements of the IMO FTP Code), having thickness of 25 mm and density of 45 kg/m3, fixed to the steel sheet by means of pins and washers welded with pitch ranging from 195 up to 270 mm. The panel joints consist of L shaped bent edges of the steel sheets, insertion of an U shaped steel profile, 2 mm thick and having dimensions of 85x55 mm. The U profiles are filled with the same mineral wool and the joints are covered, on the side opposite to the steel sheets, with a further layer of mineral wool having width of 300 mm; this additional layer covers also all the bulkhead edges. The panel steel sheets and the U shaped profiles are fixed on the upper and lower sides, to steel flats, 5 mm thick and having width, respectively, of 160 and 130 mm, by means of M8 screws. The joints are sealed, on the side fitted with the steel sheets, with gaskets type KERAFIX FLEXPAN 200, 2 mm thick, product named PLASTAZOTE and seal named SIKAFLEX 295 UV or SIKAFLEX 291.

Field of application
Fire resistant A-0 Class lightweight bulkhead with fire hazard on side fitted with the mineral wool.
Reference documents
SOMEC drawing No. RD-0004 dated 9 October 2018 approved on 9 October 2018 with endorsement No. LABS-1733.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2018CS013069 issued on 9 October 2018 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED370023CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****