MED283624CS!006ENGD- -  -  N- MIC B0 / EL -N- S- S- -20/06/2024- Marine Equipment- - SN- S- - N-  - 290,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED283624CS/006- N-Jun 19, 2029290487
 
Form
  Marine Equipment(TO)
Certification N. MED283624CS/006 - (ENG)
Certificate date 20/06/2024
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
MIC B0 / EL
Applicant MARINE INTERIORS CABINS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 22/04/2022
Expire date 19/06/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED283624CS/006

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MIC B0 / EL
Applicant MARINE INTERIORS CABINS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
June 20, 2024
June 19, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED283624CS/006
Page 1 of 2

Product description

Bulkhead consisting of panels having maximum height of 2400 mm and maximum width of 600 mm. Such panels are composed of a mineral wool layer fitted with glass veil, (certified non combustible in conformity to the requirements of the IMO FTP Code), 15 mm thick and having density of 140 kg/m3 or 160 kg/m3 named PAROC Marine Slab 160 N8 or mineral wool layer, (certified non combustible in conformity to the requirements of the IMO FTP Code), 15 mm thick and having density from 140 kg/m3 up to 220 kg/m3 named ROCKWOOL Searox SL488, glued to a steel sheet having thickness of 0.7 mm by means of 140 g/m2 of glue named PROPTOPUR AE100 or glue named SIKAFORCE 7110 L35 or glue named SIKAFORCE-110. The panel joints consist of ā€œLā€ shaped sheet bent edges, relevant locking and fixing by means of screws fitted with pitch of 350 mm. The bulkhead is fitted on perimeter sides, with U shaped steel profiles, 3 mm thick and having dimensions of 50x35 mm. The panel steel sheets are fixed to these profiles by means of screws fitted with pitch of 200 mm
The bulkhead may be fitted, at the maximum height of 2130 mm, with metallic box, not externally insulated, 40 mm deep and having maximum dimensions of 300x100 mm, composed of steel sheet having thickness of 0.6 mm.
Field of application
Fire resisting B-0 Class bulkhead for general applications.

Reference documents
Marine Interiors Cabins SpA drawings No. 24PC00351 and No. 24PC00348, dated 22 December 2020, enclosed to DBI test reports No. PGB10069A and No. PGB10069B dated 26 February 2021.

Marine Interiors Cabins SpA drawings No.+24PC00348.01 rev 0.1 and No. +24PC00351.01 rev. 0.1 dated 22 May 2024,
Tests carried out
Tests as per DBI Test Laboratory reports No. PGB10069A and No. PGB10069B issued on 26 February 2021 according to IMO 2010 FTP Code Part 3.
Tests as per RINA Test Laboratory reports No. 2024CS01208/5 and 2024CS01208/6 issued on 23 February 2024, according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED283624CS/006
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****