MED162314CS!002ENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: B
Certification N. MED162314CS/002
Certificate date 7/8/14
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº A.1/3.18a
USCG Category N° 164.112
Model or Denomin. Bovine leather type INTRECCIO
Directive 2012/32/EU
Dati Certificato F
Certification N. MED243017NA/001
Certificate date 21/11/2017
Mod. B Notified Body RINA (No. 0474)
Regulation and Standards IMO Res. MSC.307(88)-(2010 FTP Code),RINA Rules for the certification of Marine Equipment,Chapter II-2 of Solas '74 as amended


PRODUCT VERIFICATION (MODULE F)
CERTIFICATE No.  MED243017NA/001

This is to certify
that RINA Services S.p.A. did carry out appropriate examinations and tests in order to check the conformity of the equipment of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2017/306 and according to the type described in the EC Type Examination Certificate (Module B) below indicated.
Surveyor CARMELO SATARIANO
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type Bovine leather type INTRECCIO
Applicant MARGU SRL
VIA UGO NIUTTA 36,80128 Napoli (NA),ITALY
Module B certificate Number  MED162314CS/002
Date  08/07/2014 
Date   RINA (No. 0474)
    
Issued in NABO 
On November 21, 2017

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE to affix the following symbol on the equipment verified by the Surveyor of RINA Services S.p.A. and specified in the Attachment to this Certificate.
0474 /17
 
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.112/EC0474/MED243017NA/001 to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
RINA Services S.p.A. - Biagio Pugliese
**** NOTICE: This is NOT an official certificate ****