FAB012624CFENG- -  -  N- Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel -N- S- S- -24/06/2024- Fabbricanti Approvati- - SN- N- - S-  - 1,036,785BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB012624CF- N-Jun 6, 20291036785
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB012624CF - (ENG)
Certificate date 24/06/2024
Type Approvazione di fabbricanti di materiali
Product Tubi non saldati in acciaio austenitico ed in acciaio austeno-ferritico (duplex)

Model or Denomin.
Items
Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel
RINA GRADE:304/304L, 316/316L, 321, 347, AND UNS31803
Applicant MAXIM TUBES COMPANY PVT LTD
Place of requester Survey No.105/106, Near 66KV Sub Station, Pansar Road Ahmedabad-Mehsana Highway, Chhatral, Dist - Ga  %  382729 Ahmedabad (Gujarat-24)  % INDIA
Tel. N.,Fax, Email ---, ---, mr@maximtubes.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 06/06/2029
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB012624CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless steel tubes and pipes in austenitic and austenitic-ferritic (duplex) stainless steel
Type Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex)
stainless steel

RINA GRADE:304/304L,316/316L,321,347,AND UNS31803
Applicant MAXIM TUBES COMPANY PVT LTD
Survey No.105/106, Near 66KV Sub Station, Pansar Road Ahmedabad-Mehsana Highway, Chhatral, Dist - Ga
382729 Ahmedabad (Gujarat-24)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until June 6, 2029
_________________________________
RINA Services S.p.A.
Aswin Palliath
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB012624CF
Enclosure - Page 1 of 1
Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel

APPROVAL CONDITIONS



Size range
Outside diameter: 65 to 135mm (Hot piercing), 10 to 323.9mm (Cold process)
Wall Thickness: 5 to 20mm (Hot piercing), 0.5 to 12.7mm (Cold process)


Manufacturing process : Hot Piercing/Cold Pilgering and cold draw

Heat treatment : Solution annealing to minimum temperature as below for grades and quenching by cooling rapidly with water.

Grades: Min. Temperature
304, 304L, 316, 316L 1040 deg. C
321, 347 1040-1065 deg. C
UNS 31803 1020-1100 deg. C

Survey conditions:
The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

Note: The raw material to be provided by RINA approved manufacturer





General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.


RINA India Marine June 24, 2024
**** NOTICE: This is NOT an official certificate ****