DIP212622XT!002BIL- -  -  N- WATERTIGHT PROUD STEEL DOOR -N- S- S- -22/06/2023- Prodotti per nautica diporto- - NN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP212622XT/002- N-Jun 21, 2026166397
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP212622XT/002 - (BIL)
Certificate date 22/06/2023
Product Porta stagna

Model or Denomin.
Items
WATERTIGHT PROUD STEEL DOOR
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester Aydinli Birlik Osb Mah., Bati Cad., No.28  %  34953 Tuzla  % Turkey
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, volkanbalci@bofor.com.tr
Directive NONE
Standards RINA Rules
Expire date 21/06/2026
Head Office ISTANBUL
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP212622XT/002
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Porta stagna
Description Watertight door
Tipo WATERTIGHT PROUD STEEL DOOR
Type
Norme di riferimento Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Reference standards








_________________________________
RINA Services S.p.A.
  
Alper Tek
       
Rilasciato a ISTANBUL il 22  Giugno  2023.  Questo Certificato è valido fino al 21 Giugno 2026
   
Issued in ISTANBUL  on June 22, 2023. This Certificate is valid until June 21, 2026
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP212622XT/002
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
WATERTIGHT PROUD STEEL DOOR
Reference documents:
- Job nr. 2022/XT/01/2126

Product Description:
- Watertight doors:
600 mm x 600 mm with 4 dogs with 2 hinges
650 mm x 1500 mm with 8 dogs with 3 hinges
1100 mm x 2200 mm with 12 dogs with 3 hinges
- See drawings approved on 28 February 2019 with nr. ISDP-22819, ISDP-22821 and 04 March 2019 with
nr. ISDP-22820.
- If the same construction materials, as per approved a.m. drawing, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 600 and 1100 mm and long side between 600 and 2200 mm.
- When located in houseside, the doors are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Doors suitable for an hydraulic pressure of 5.0 m head.
- Door suitable for yachts designed for Commercial use having GT less than 500 and fitted other than the engine room and galley boundaries.
- Door suitable for pleasure yachts having any GT and fitted other than the engine room and galley boundaries.
- Door suitable for pleasure yachts having GT equal to or less than 300.
- Watertight doors for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Yachts designed for Pleasure Yachts"


Fields of application:
- Watertight door


 22.06.2023 
 Istanbul  
**** NOTICE: This is NOT an official certificate ****