FAB099125PU!003ENG- -  -  N- Grades A - B - D - E - AH32/36/40/47 - DH32/36/40/47 - EH32/36/40/47 - FH32/36/40 - AH/DH/EH/FH420 to AH/DH/EH/FH500 - 410LE/LF - 460LE/LF - 460LES/LFS - 510LFS - 5.0/9.0 Ni - AH32 RCB Z35 – P690Q/P690QL1 (EN 10028-6) -N- S- S- -09/03/2026- Fabbricanti Approvati- - SN- N- - S-  - 552,973BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB099125PU/003- N-Mar 24, 2027552973
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB099125PU/003 - (ENG)
Certificate date 09/03/2026
Type Approvazione di fabbricanti di materiali
Product Lamiere da scafo in acciaio ordinario e ad elevata resistenza

Model or Denomin.
Items
Grades A - B - D - E - AH32/36/40/47 - DH32/36/40/47 - EH32/36/40/47 - FH32/36/40 - AH/DH/EH/FH420 to AH/DH/EH/FH500 - 410LE/LF - 460LE/LF - 460LES/LFS - 510LFS - 5.0/9.0 Ni - AH32 RCB Z35 – P690Q/P690QL1 (EN 10028-6)
Applicant HYUNDAI STEEL COMPANY - DANGJIN INTEGRATED STEELWORKS
Place of requester 1480 Bukbusaneop-ro, Songak-eup  %  31719 Dangjin-si (Chungcheongnam-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 41 680 1751, +82 41 680 1799, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 24/03/2027
Responsible Office RINA Korea Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB099125PU/003
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Normal strength and higher strength hull steel plates
Type Grades A - B - D - E - AH32/36/40/47 - DH32/36/40/47 - EH32/36/40/47 -
FH32/36/40 - AH/DH/EH/FH420 to AH/DH/EH/FH500 - 410LE/LF - 460LE/LF -
460LES/LFS - 510LFS - 5.0/9.0 Ni - AH32 RCB Z35 – P690Q/P690QL1 (EN 10028-6)

Applicant HYUNDAI STEEL COMPANY - DANGJIN INTEGRATED STEELWORKS
1480 Bukbusaneop-ro, Songak-eup
31719 Dangjin-si (Chungcheongnam-do)
REPUBLIC OF KOREA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until March 24, 2027
_________________________________
RINA Services S.p.A.
Sung-Ki Yang
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB099125PU/003
Enclosure - Page 1 of 3
Grades A - B - D - E - AH32/36/40/47 - DH32/36/40/47 - EH32/36/40/47 - FH32/36/40 - AH/DH/EH/FH420 to AH/DH/EH/FH500 - 410LE/LF - 460LE/LF - 460LES/LFS - 510LFS - 5.0/9.0 Ni - AH32 RCB Z35 – P690Q/P690QL1 (EN 10028-6)

APPROVAL CONDITIONS


◎ Rolled Steel Plates for Hull Structure
Steel making process: Basic Oxygen L/D Converter
Casting process: Continuous Casting
Deoxidation practice, condition of supply and thickness:
Steel grades
Condition of supply
Max. thickness (mm)
Z-quality
Fine grained elements
Deoxidation practice
A/B
AR
70
Z35
Al
Si + Al killed
D
AR
35
-
Al
A/B/D
CR
50
Z35
Al + Nb/Ti
Normalizing
100
Z35
Al + Nb/V
TMCP
100
Z35
Al + Nb/Ti
E
Normalizing
83
Z35
Al + Nb/V
TMCP
100
Z35
Al + Nb/Ti
AH32/36
AR
35
-
Al, Al + Nb
DH32/36
AR
20
-
Al
AH32/36
TMCP
40
Z35
Al
AH32/36
DH32/36
CR
35
Z35
Al + Nb/Ti
Al + Nb
AH32/36
DH32/36
EH32/36
Normalizing
83
Z35
Al + Nb/V
AH32/36
DH32/36
TMCP
40
Z35
Al + Nb
AH32/36/40
DH32/36/40
EH32/36/40
TMCP
100
Z35
Al + Nb/Ti
FH32/36
TMCP
80
Z35
Al + Nb/Ti
FH40
TMCP
50
Z35
Al + Nb/Ti
AH36/40/47*
DH36/40/47*
EH36/40/47*
TMCP
100
Z35
Al + Nb/Ti
*) Steel plate for brittle crack arrest
- Steel slabs to be used : from approved manufacturers, Hyundai steel-Dangjin works & Companhia Siderurgica do Pecem (only for A,B grades)
*) Cutting & marking process may be done by following company, test/inspections is to be done on manufacturer of steel plates.
- Myeong Ryun Steel (Dangjin-si)

◎ Coils and De-coiled plates for Hull Structure
Steel making process: Electric Arc Furnace, Basic Oxygen Converter
Casting process: Continuous Casting
Deoxidation practice, condition of supply and thickness:
Steel grades
Condition of supply
Max. thickness
(mm)
Z-quality
Fine grained elements
Deoxidation practice
A/B
AR
15.8
-
Al
Si + Al killed
TMCP
-
AH32/36
TMCP
22
-
Al + Nb

* Uncoiling process including stamping is to be done by following companies, test/inspections is
to be done on manufacturer of steel plates.

- Asian steel Co., Ltd.
- Samwoo Co., Ltd.
- Hanil steel Co., Ltd.


◎ Higher Strength Steel Plates for Hull Structure
Steel making process: Basic Oxygen L/D Converter
Casting process: Continuous Casting
Deoxidation practice, condition of supply and thickness:
Steel grades
Condition of supply
Max. thickness
(mm)
Z-quality
Fine grained
elements
Deoxidation
practice
AH/DH/EH/FH420
AH/DH/EH/FH460
AH/DH/EH/FH500
TMCP
50

Z35
Al + Nb/Ti
Si + Al killed


◎ Ferritic Steel Plates for low temperature service
Steel making process: Basic Oxygen L/D Converter
Casting process: Continuous Casting
Deoxidation practice, condition of supply and thickness:
Steel grades
Condition of supply
Max. thickness
(mm)
Z-quality
Fine grained
elements
Deoxidation practice
5.0/9.0 Ni
QT
40
Z35
Al
Si + Al killed
410LE/LF
460LE/LF
TMCP
40
Z35
Al + Nb/Ti
Si + Al killed
TMCP without AcC*
25
Z35
Al + Nb + Ti
Si + Al killed
460LES/LFS**
TMCP
25
Z35
Al + Nb + Ti Si + Al killed
510LFS***
TMCP
50
Z35
Al + Nb + Ti
Si + Al killed
AcC: Accelerated cooling
*) For plates intended for use in cargo tanks and process pressure vessels for ammonia, the mechanical properties are to be in accordance with RINA Rules and IGC Code 17.12.
**) Tensile strength Rm(N/mm2) of Grade 460LES/LFS has been modified to 440-590.
***) Tensile strength Rm(N/mm2) of Grade 510LF has been modified to 490-630.

◎ Higher Strength Steel Plates for Corrosion resistance
Steel making process: Basic Oxygen L/D Converter
Casting process: Continuous Casting
Deoxidation practice / fine grained elements : Si, Al killed / Al + Nb + Ti
Steel grade : AH32 RCB Z35
Condition of supply and thickness: TMCP, 40 mm
*) Welding process & welding consumbles (manufacturer)
FCAW / SC-71COT (Hyundai welding Co.)
SAW / Superflux-55ULT x H-14 (Hyundai welding Co.)


◎ Steel plates according to other standards
Deoxidation practice, condition of supply and thickness:
Steel grades
Condition of supply
Max. thickness
(mm)
Z-quality
Fine grained
elements
Deoxidation
practice
P690Q/P690QL1
(EN 10028-6) *
Q&T
50
Z35
Al
Si + Al killed

*) Steel making process / casting process : Basic Oxygen L/D Converter / Continuous Casting
*) Max. heat input qualified: 35 kJ/cm for SAW and 10 kJ/cm for FCAW


Survey conditions:
The plates are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly.

Remarks:
This certificate annuls and replaces the certificate no. FAB099125PU/001





General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Korea Marine March 9, 2026
**** NOTICE: This is NOT an official certificate ****