1. Product Description
+ low voltage shipboard electrical power cables with following characteristics:
Type
Designation | Rated
Volt.
[㎸] | Number of
Cores | Nominal Conductor
Cross-sectional
Area [㎟] | Maximum rated
Conductor
Temperature [℃] | Fire Property |
0.6/1㎸ CJPF/SC
0.6/1㎸ CJPF80/SC
0.6/1㎸ CJPF90/SC
0.6/1㎸ CJPF86/SC
0.6/1㎸ CJPF96/SC
0.6/1㎸ CJ86/SC | 0.6/1 | 1
2
3 (2+E)
4 (3+E)
5 ~ 37 | 1.0 ~ 300
1.0 ~ 185
1.0 ~ 240
1.0 ~ 240
1.0, 1.5, 2.5 | 90 | Flame-retardant
- IEC 60332-1
- IEC 60332-3-22 Cat.A |
0.6/1㎸ CJPJ/SC
0.6/1㎸ CJPJ80/SC
0.6/1㎸ CJPJ90/SC
0.6/1㎸ CJPJ85/SC
0.6/1㎸ CJPJ95/SC
0.6/1㎸ CJ85/SC | -ditto- | -ditto- | -ditto- | -ditto- | -ditto- |
0.6/1㎸ CJPF/NSC
0.6/1㎸ CJPF80/NSC
0.6/1㎸ CJPF90/NSC
0.6/1㎸ CJPF86/NSC
0.6/1㎸ CJPF96/NSC
0.6/1㎸ CJ86/NSC | 0.6/1 | 1
2
3 (2+E)
4 (3+E)
5 ~ 37 | 1.0 ~ 300
1.0 ~ 185
1.0 ~ 240
1.0 ~ 240
1.0, 1.5, 2.5 | 90 | Flame-retardant
- IEC 60332-1
- IEC 60332-3-22 Cat.A
Fire-resistant
- IEC 60331-1
- IEC 60331-2 |
0.6/1㎸ CJPJ/NSC
0.6/1㎸ CJPJ80/NSC
0.6/1㎸ CJPJ90/NSC
0.6/1㎸ CJPJ85/NSC
0.6/1㎸ CJPJ95/NSC
0.6/1㎸ CJ85/NSC | -ditto- | -ditto- | -ditto- | -ditto- | -ditto- |
*Note) 1~4 core: power cable, 5~37 core: control cable, E: earth wire
+ Conductor: stranded tinned annealed copper (class 2)
+ Insulation: cross-linked polyethylene (XLPE; acronym “J”)
+ Fire-resisting : mica tape (only for NSC type)
+ Inner Sheath: without / thermoplastic polyolefin (SHF1; acronym “PF”) / cross-linked polyolefin (SHF2; acronym “PJ”)
+ Armour: without / tinned copper wire braid (acronym “8”) / galvanized steel wire braid (acronym “9”)
+ Outer Sheath: without (acronym “0”) / thermoplastic polyolefin (SHF1; acronym “6”) / cross-linked polyolefin (SHF2; acronym
“5”)
+ Low smoke & low toxicity: IEC 60754-1 & 2, IEC 61034-1 & 2
+ Marking Guidance: rated voltage, type & size, standards for fire property, Manufacturer, year, length [M]
TYPE APPROVAL CERTIFICATE
NO. ELE078824WS/001
Enclosure - Page 2 of 2
2. Reference Documents:
+ Specification of added low voltage power cables. Filed by RINA with drawing No. SHEL-21016.
+ Test Report: “Shanghai Intelligent Service and Technology Co., Ltd” Report No.: TN19-4047. Filed by RINA with drawing No. SHEL21017.
+ Manufacturer's information, Filed by RINA with drawing No. SHEL-21018.
+ Routine test report signed by attending Surveyor: "Shandong zhongchuan Cable Co., Ltd". Filed by RINA with drawing No. SHEL-21011.
+ Asbestos free Declaration and structure and technical declaration. Filed by RINA with drawing No. SHEL-21012.
+ Narrative report signed by our attending Surveyor. Filed by RINA with drawing No.: SHEL-21010.
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
4. Renewal/Revision
+ March 27, 2019: initial certification. Certificate No. ELE035119WS/001.
+ January 11, 2025: renewed without design change. New certificate No. ELE078824WS/001 revokes previous certificate.