Single leaf hinged door with maximum clear light of 1000x2100 mm (WxH). The leaf, having maximum dimensions of 1028x2109 mm (WxH), is composed of two steel sheets having, each, thickness of 0.8 mm assembled by means of rivets having diameter of 4 mm and, in between, the insulating material. This material is composed of one layer of mineral wool type PAROC MARINE SLAB 150 or KNAUF INSULATION MHTB 700 or ROCKWOOL SEAROX SL440 having thickness of 40 mm and density of 150 kg/m3 glued to the steel sheets by means of 150 g/m2 of glue named SIKAFORCE 7110 L55 or PROTOPUR AE100 or DUNAPOL AD4020. The perimeter of the leaf is fitted with C shaped stainless or carbon steel profiles 0.8 mm thick and, on the hinges side, with a C shaped steel profile having thickness of 1.5 mm. The door frame is composed of a hollow carbon or stainless steel profile having thickness of 1.2 mm and it is fitted with a C shaped steel profile 0.8 mm thick; the horizontal element of the frame is insulated with the same mineral wool as the leaf. The frame is fixed to the bulkhead by means of screws type AF 4.2 x 50 mm, five on each side. The leaf may be fitted with a window made of a glass type PYROBEL EI 30, having maximum clear view of 260x360 (WxH) mm, with a thickness of 16 mm. The window’s frame is composed of stainless steel profiles 1.2 mm thick and a C shaped steel profile having dimensions of 20x40 mm and thickness of 0.8 mm; the frame is completed with ceramic paper named INSULFRAX and it is fixed by means of screws type M5. The door may be fitted with two ventilation grilles having dimensions of 450x146 mm that connect an air duct composed of steel having thickness of 0.8 mm. The door may also be equipped with a peephole and a drop down sill. The door is fitted with three stainless steel hinges and a closure system actuated by an handle.
The door may be manufactured also by:
- Metaldesi Srl - Via Ermanno Casoli 4 - 60044 Fabriano (AN) - Italy
- Wingeco s.r.l. - Sergio Pugliara - Via Geirato 150R/152R 16138 Genova - Italy
- Zanetti Bruno s.r.l. - Giuseppe Bizzotto - via del santo 205, 35010 Limena (PD) - Italy
- Inoxking - Sergio Constenla - Via Cal Longa 22, Vazzola (TV) - Italy
|
ATTACHMENT TO
CERTIFICATE Nr. MED471225CS/002
Page 2 of 3 |
Field of application
Fire resistant B-15 Class single leaf hinged door with fire hazard on both sides. The door fitted with carbon steel frame and without drop down sill is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame designReference documents
PRECETTI drawing No. PR107 Rev. 07 dated 31 January 2018 approved on 15 February 2018 with endorsement No. LABS-1608.Tests carried out
Tests as per RINA Test Laboratory Report No. 2015CS012884/2 dated 18 December 2015 and Istituto Giordano Test report No. 346871 dated 21 November 2017 issued according to IMO 2010 FTP Code Part 3. |