FAB007323WSENG- -  -  N- WZ II 267-68-150A, WZ II 267-68-150A  -N- S- S- -03/04/2023- Fabbricanti Approvati- - SN- N- - S-  - 1,196,008BFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB007323WS- N-Apr 2, 20281196008
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB007323WS - (ENG)
Certificate date 03/04/2023
Type Approvazione di fabbricanti di materiali
Product Bombole in pressione

Model or Denomin.
Items
WZ II 267-68-150A, WZ II 267-68-150A
Applicant SHANGHAI FIRETEC MECHATRONIC ENGINEERING CO., LTD.
Place of requester Building 15-1, No. 2183 Songzheng Gonglu, Shihudang Town, Songjiang District, Shanghai  % CHINA
Tel. N.,Fax, Email +86 21 58627886, ---, factory@firetecmarine.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 02/04/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB007323WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Pressure bottles
Type WZ II 267-68-150A, WZ II 267-82-150A
Applicant SHANGHAI FIRETEC MECHATRONIC ENGINEERING CO., LTD.
Building 15-1, No. 2183 Songzheng Gonglu, Shihudang Town, Songjiang District, Shanghai
CHINA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until April 2, 2028
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB007323WS
Enclosure - Page 1 of 1
WZ II 267-68-150A, WZ II 267-68-150A

APPROVAL CONDITIONS


-Manufacturing process: Pipes Spin;

- Specification and Characteristics:

RINA approved drawing No.SHMC-23952,23953,23954,23955 dated FEB.10,2023

Shell Material
37Mn
Maximum Working Pressure(Mpa)
15.0
Hydraulic Test Pressure(Mpa)
25.0
Work Temperature(°C)
-40.0~60.0
Minimum Shell Thickness(mm)
5.8
Outside Diameter(mm)
267+/-2.67
Length +/- 20 (mm)
1470 for 68L
1750 for 82L
Volumetric Capacity(L)
68.0+/-3.0, 82.0+/-4.0
Heat Treatment
Quenched & Tempered
Filling Contents
CO2,N2

Note: Raw material is to be provided by Approved manufacturer.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine April 3, 2023
**** NOTICE: This is NOT an official certificate ****