MED599125CSENGD- -  -  N- DEEP-SEA II 6-8-10-12-16-20-25P  -N- S- S- -19/01/2026- Marine Equipment- - SN- S- - N-  - 1,099,152B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED599125CS- N-Jan 18, 20311099152
 
Form
  Marine Equipment(TO)
Certification N. MED599125CS - (ENG)
Certificate date 19/01/2026
Type Mezzi di salvataggio
Product Zattere di salvataggio gonfiabili
Item Nº MED/1.12

Model
Items/Sizes
DEEP-SEA II 6-8-10-12-16-20-25P
Applicant LALIZAS ITALIA S.R.L.
Place of requester VIA FONTANELLE 22  %  16012 Busalla (GE)  % ITALY
Tel. N.,Fax, Email 010968011, 0109670577, rd.3@lalizas.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.81 (70), as amended,IMO Res. MSC.481(102)
Reference Documents SOLAS 74 Reg. III/13, SOLAS 74 Reg. III/21, SOLAS 74 Reg. III/26, SOLAS 74 Reg. III/31, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.481(102), IMO MSC/Circ.811, IMO MSC.1/Circ.1630 Rev.2.
Request 16/12/2025
Validity 18/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED599125CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.12
Description Inflatable liferafts
Type DEEP-SEA II 6-8-10-12-16-20-25P
Applicant LALIZAS ITALIA S.R.L.
VIA FONTANELLE 22,16012 Busalla (GE),ITALY
Testing standards IMO Res. MSC.81 (70), as amended,IMO Res. MSC.481(102)
Reference standards SOLAS 74 Reg. III/13, SOLAS 74 Reg. III/21, SOLAS 74 Reg. III/26, SOLAS 74 Reg. III/31, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.481(102), IMO MSC/Circ.811, IMO MSC.1/Circ.1630 Rev.2.
Issued in Genoa on
This Certificate is valid until
January 19, 2026
January 18, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED599125CS
Page 1 of 3
Product description

Throw overboard inflatable liferafts with the following main characteristics:


DEEP-SEA 6p
DEEP-SEA 8p
DEEP-SEA 10p
DEEP-SEA 12p
Shape
square
Length/width
1994 mm
2272 mm
2550 mm
2692 mm
Diameter of buoyancy tubes
241 mm
256 mm
270 mm
286 mm
Working pressure
0.017 Mpa
Type of container /material
Flat : ABS or VTR
Roll: VTR
Maximum weight
Pack A: 84 Kg
Pack B:70.5 Kg
Pack A: 98 Kg
Pack B: 76 Kg
Pack A: 105.5 Kg
Pack B: 81 Kg
Pack A: 117.5 Kg
Pack B: 91.5 Kg
Maximum installation height (*)
25 m
Required towing force
2 kts: 0.5 kN
3 kts: 1.10 kN
2 kts: 0.65 kN
3 kts: 1.25 kN
2 kts: 0.6 kN
3 kts: 1.12 kN
2 kts: 0.75 kN
3 kts: 1.55 kN

DEEP-SEA 16p
DEEP-SEA 20p
DEEP-SEA 25p
Shape
octogonal
Length/width
3376 mm / 3376 mm
4280 mm / 4280 mm
4280 mm / 4280 mm
Diameter of buoyancy tubes
320 mm
360 mm
360 mm
Working pressure
0.017 Mpa
Type of container /material
Roll: VTR
Maximum weight
Pack A: 153 Kg
Pack B: 109 Kg
Pack A: 169 Kg
Pack B: 125 Kg
Pack A: 178 Kg
Pack B: 125 Kg
Maximum installation height
25 m
Required towing force
2 kts: 0.8 kN
3 kts: 1.90 kN
2 kts: 1.10 kN
3 kts: 2.18 kN
2 kts: 1.10 kN
3 kts: 2.18 kN

(*) In case of ABS flat container, the maximum installation height is reduced to 18 m.

ATTACHMENT TO
CERTIFICATE No. MED599125CS
Page 2 of 3

Coated fabrics:
1.Buoyancy chamber, bottom and canopy support: polyester fabric coated with PVC on both sides 1100Dtex 640 g/m2 black or orange colored;
2.External canopy: polyester fabric coated with PVC on both sides 550 Dtx 510 g/m2 orange colored or rnylon fabric 210/210 2PU WR orange colored;
3.Inner canopy: Nylon fabric coated with polyurethane 2PU+WR 65g/m2 light blue colored or Pam 100%+60g/m2 light blue colored.
Reference documents

- Technical Specification drawing n°402 Rev 2 issued by Lalizas Italia SRL and approved by RINA with n° CSST 18959;
- Liferaft General arrangement drawings issued by Lalizas Italia Srl and approved by RINA with n° CSST 18954 (OMO-Z-5011-12-13-14) and CSST 18953 (OMO-Z-5015-32-16);
- Canopy Int/Ext General arrangement drawings n° OMO-Z-5026-27-28-29 issued by Lalizas Italia Srl and approved by RINA with n° CSST 18952 (OMO-Z-5026-27-28-29 ) and CSST 18951 (OMO-Z-5030-33-31);
- Marking details trade mark Arimar/Lalizas Container for Inflatable liferafts particular issued by Lalizas Italia Srl and approved by RINA with n° CSST 18955;
- Marking details trade mark Arimar/Lalizas Inflatable liferafts particular issued by Lalizas Italia Srl and approved by RINA with n° CSST 18956;
- Container Flat Type ABS/GRP n° OMO-Z-5125/5135/5136 and Roll Type VTR n° OMO-Z-5145 approved with n° CSST 24135.
Tests carried out

- Practical test report issued in compliance with MSC.81(70) and MSC.295(87), issued by Arimar Spa, witnessed and filed by RINA with n° CSST 8038 (2011CS013227);
- Inflation system approved and tested in compliance with ISO 15738:2019 (Type Approval FPE164324CS);
- Fabric test report list for inflatable tube fabric, external canopy and internal canopy, issued by Arimar Spa witnessed and filed by RINA with n° CSST 8039 (2011CS013227);
- Pratical test report additional in compliance with MSC.81(70) and MSC.295(87), issued by Lalizas Italia Srl, witnessed and filed by RINA with n° CSST 18960 (2020CS013388).
- Inflation test, dated 11/12/2025, witnessed and filed by RINA with n° CSST 25665.




ATTACHMENT TO
CERTIFICATE No. MED599125CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****