DIP431325CSBIL- -  -  N- NV16 -N- S- S- -05/11/2025- Prodotti per nautica diporto- - SN- N- Stefano Moscatelli- N-  - 426,420Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP431325CS- N-Nov 4, 2028426420
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP431325CS - (BIL)
Certificate date 05/11/2025
Product Salpa ancore

Model or Denomin.
Items
NV16
Applicant MZ ELECTRONIC S.R.L.
Place of requester VIA BAINSIZZA, 2  %  20900 Monza (MB)  % ITALY
Tel. N.,Fax, Email 0392148126, 0392146244,
Directive NONE
Standards RINA Rules
Expire date 04/11/2028
Responsible Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP431325CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Salpa ancore con Arrestatoio
Description Windlasswith Chainstopper
Tipo NV16
Type
Richiedente
Applicant
MZ ELECTRONIC S.R.L.,VIA BAINSIZZA, 2,20900 Monza (MB),ITALY
Norme di riferimento RINA Rules
Reference standards RINA Rules








_________________________________
RINA Services S.p.A.
  
Giulia CresciStefano Moscatelli
       
Rilasciato a VIAREGGIO il 5  Novembre  2025.  Questo Certificato è valido fino al 4 Novembre 2028
   
Issued in VIAREGGIO  on November 5, 2025. This Certificate is valid until November 4, 2028
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
N. DIP431325CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
NV16
Reference documents

- Technical Documentation filed in our database with Drawing no. DIP-141495.

- Technical drawings approved with file no. DIP-98035 and DIP-97928.

Technical characteristics


Design Continuous Duty Pull : 12.16 KN ( very high tensile strength steel chain )
Maximum chain Diameter : 16mm
Output Speed of rotation: 21.6 rpm
Output torque: 1625 Nm (S1 condition)
Maximum anchorage depth : 82,5 m

NV16 Windlass can be provided with Chainstoppers
STP_MOD12
STP_MOD14
STP_MOD17
Fields of applications

Yachts under 500GT

Materials/Components

As per above mentioned approved drawings.

Acceptance Conditions

See also approval letters DIP/2019/01590/CRLVA .


The installation on board is to be made in accordance with the Manufacturer’s instructions.
· The validity of the present certificate is based on the assumption of the constant conformity of the single product manufactured to the prototype that has been tested with positive results to the type approval tests. The firm is responsible in the whole of the above mentioned conformity.
· The holder of the type approval certificate has to inform RINA of any intended modifications to the product and/or manufacturing process which are liable to effect the required conformity of the product.
· The certificate becomes automatically invalid in the following case:
1. the holder of the certificate does not respect the above mentioned obligations.
2. changes have been made to the reference document on which the type approval is based.
· The type approval certificate may be declared suspended or cancelled by RINA when the conditions on which the type approval was based are not fulfilled.

This certificate replaces certificate no. DIP368022CS.


Viareggio 04 Novembre  2025 
Viareggio November 04, 2025
**** NOTICE: This is NOT an official certificate ****