MED045423XP!001ENGF- -  -  N- VWEL-01 -N- S- S- -21/06/2023- Marine Equipment- - SN- S- - N-  - 1,196,250B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED045423XP/001- N-Jun 20, 20281196250
 
Form
  Marine Equipment(TO)
Certification N. MED045423XP/001 - (ENG)
Certificate date 21/06/2023
Type Mezzi di salvataggio
Product Embarkation ladders
Item Nº MED/1.29

Model or Denomin.
Items
VWEL-01
Applicant VERTEX SAFETY B.V.
Place of requester Abel Tasmanstraat 67  %  3165 AM Rotterdam  % NETHERLANDS
Tel. N.,Fax, Email +310685170922, ---, invoice@vertexsafety.nl
Directive (EU) 2022/1157
Standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference Documents Reg. III/4, III/11, Reg. III/34, X/3 of SOLAS 74 Convention as amended,IMO Res. MSC.36(63)-(1994 HSC Code), IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285, IMO MSC.1/Circ.1630
Request 05/MAR/2021
Expire date 20/06/2028
Head Office RINA Poland
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jaroslaw Kondracki S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED045423XP/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.29
Description Embarkation ladders
Type VWEL-01
Applicant VERTEX SAFETY B.V.
Abel Tasmanstraat 67,3165 AM Rotterdam,NETHERLANDS
Testing standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference standards Reg. III/4, III/11, Reg. III/34, X/3 of SOLAS 74 Convention as amended; IMO Res. MSC.36(63)-(1994 HSC Code), IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285, IMO MSC.1/Circ.1630
Issued in RINA Poland on
This Certificate is valid until
June 21, 2023
June 20, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Jaroslaw Kondracki
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED045423XP/001
Page 1 of 3
Product description
Vertex Embarkation Ladders uses ;
- Rubber Steps for the first 4 steps
- Manila Rope with breaking strength >= 24 KN,
- Solid Plastic Clamp blocks
- Aluminium H-type Ferrule

Reference document
1. DRAWING
-Pilot & Embarkation Ladder Product Specification DWG. No. PLFP-2556;
-Declaration of Conformity -Embarkation Ladder DWG. No. PLFP-2554;
-Risk Assessment -Pilot and Embarkation Ladders DWG. No. PLFP- 2559.

2. TEST REPORT
Product test RINA statement No. 2023/XN/01/843 DWG. No. PLFP-2557 for embarkation ladder covering visual examination, step flexibility, step friction, step surface durability, ladder and step attachment strength and unrolling test as witnessed by RINA, dated 19 May 2023 according to ISO 5489:2008.

Remark
1. Ladders shall be designated by the following indications, in order given: “Embarkation ladder ISO 5489”; “S” followed by the number of steps; “L” followed by the length, in meters.
2. The bottom of at least two steps of the ladder shall be marked with: the name and address of the manufacturer; the manufacture’s model designation; “ISO 5489”and “SOLAS”; the year of assembly or reassembly of the ladder; identification of the approved maritime safety administration, along with any approval indications required by that administration, and where used, identification of an approved organization acting on behalf of the maritime safety administration.
3. The bottom of the each replacement step shall be marked with: name and address of the manufacturer; the manufacturer’s model designation; the words “REPLACEMENT STEP ONLY”; “ISO 5489” and “SOLAS”; the year of production of the step; identification of the approved maritime safety administration, along with any approval indications required by that administration; and where used, identification of an approved organization acting on behalf of the maritime safety administration .












ATTACHMENT TO
CERTIFICATE No. MED045423XP/001
Page 2 of 3


4. Each ladder shall be subjected to the ladder and step attachment strength test in Table 1 of ISO 5489
at approximately 30 month intervals. Each ladder which fails the test shall be rebuilt or scrapped. The ladder shall be stamped or tagged near the bottom of the ladder with the date of the test and the identification of the person or company performing the test. The person or company performing the test shall also provide a test certificate for the owner of the ladder, indicating the details of the test, including the date, and the identification for the person or company performing the test.




ATTACHMENT TO
CERTIFICATE No. MED045423XP/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Jaroslaw Kondracki
**** NOTICE: This is NOT an official certificate ****