ELE128823XGENG- -  -  N- iCER -N- S- S- -05/02/2024- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 893,444Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE128823XG- N-Feb 4, 2029893444
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE128823XG - (ENG)
Certificate date 05/02/2024
Type Impianti di Automazione
Product Exhaust Gas Recirculation System

Model or Denomin.
Items
iCER
Applicant WINTERTHUR GAS & DIESEL LTD.
Place of requester SCHÜTZENSTRASSE 3  %  CH 8400 Winterthur  % SWITZERLAND
Tel. N.,Fax, Email +41 52 264 8844, +41 52 264 8866, info@wingd.com
Standards Rules for the Classification of Ships - Part C - Machinery, Systems and fire protection - Ch.3, Sect.6, Tab.1.
Expire date 04/02/2029
Head Office Hamburg
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE128823XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Exhaust Gas Recirculation System
Type iCER
Applicant WINTERTHUR GAS & DIESEL LTD.
SCHÜTZENSTRASSE 3
CH 8400 Winterthur
SWITZERLAND
Reference standards Rules for the Classification of Ships - Part C - Machinery, Systems and fire protection - Ch.3, Sect.6, Tab.1.
  

 
 
   .   This Certificate is valid until February 4, 2029
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE128823XG
Enclosure - Page 1 of 1
iCER
Product Description:

The intelligent Control by Exhaust Recycling (iCER) is a low pressure exhaust gas recirculation system with flow regulation and exhaust gas cooler for WinGD DF 2-stroke engines. The primary targets are stabilization of combustion at high load, improvement of fuel gas efficiency and reduction of methane slip in gas mode and reducing of NOx emissions in diesel mode.


Application/ Restriction:

WinGD DF 2-stroke engines,


Reference Documentation

- Package no. 1961
- Package no. 1971
- Package no. 1976


Acceptance conditions

· The validity of the present certificate is based on the assumption of the constant conformity of the single product manufactured to the prototype that has been tested with positive results to the type approval tests. The manufacturer is responsible in the whole of the above mentioned conformity.
· The holder of the type approval certificate has to inform RINA of any intended modifications to the product and/or manufacturing process which are liable to effect the required conformity of the product.
· The certificate becomes automatically invalid in the following case:
1. the holder of the certificate does not respect the above mentioned obligations.
2. changes have been made to the reference document on which the type approval is based.
· The type approval certificate may be declared suspended or cancelled by RINA when the conditions on which the type approval was based are not fulfilled.
- The safety, control and monitoring system, including sensors and actuators, is not covered by this certificate.

Hamburg February 5, 2024
**** NOTICE: This is NOT an official certificate ****