MED493025CS!002ENGB- -  -  N- CLASS A60 AIRGAP ALUMINIUM DECK -N- S- S- -25/11/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493025CS/002- N-Nov 24, 2030704840
 
Form
  Marine Equipment(TO)
MED493025CS/002
Certification N. MED493025CS/002 - (ENG)
Certificate date 25/11/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
CLASS A60 AIRGAP ALUMINIUM DECK
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616,IMO Circ. MSC.1 1621
Request 27/10/2025
Expire date 24/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493025CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type CLASS A60 AIRGAP ALUMINIUM DECK
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
November 25, 2025
November 24, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493025CS/002
Page 1 of 2

Product description

Deck composed of an aluminium plate, 4 mm thick, fitted, on one side, with T stiffeners having height of 50 mm, flange width of 50 mm and web and flange thickness of 5 mm, welded to the plate with pitch of 300 mm. The deck is insulated, on the stiffened side, by means of one layer of an insulating material named PROMAGUARD or PROMAGUARD ALU (15 mm thick and having density of 240 kg/m3) fitted at a distance of 10 mm from the stiffeners. The insulating material panels are fixed to the deck plate and stiffeners by means of metallic pins and washers fitted with pitch ranging from 240 up to 335 mm; the panels, on the joints, are overlapped for at least 50 mm and glued with 80 g/m2 of Promaseal Glue. The deck is covered, on the unexposed side, with a carpet having thickness of 4 mm.

Field of application
Fire resisting A-60 Class load-bearing aluminium deck with fire hazard on the stiffened insulated side.

Reference documents
Drawings enclosed to LAPI Test Laboratory report No. 1652.4IM0150/10 dated 6 December 2010 and Promat drawing N. R26 DAM 14 dated 6 October 2015 approved on 26 November 2015 with endorsement No. LABS-1169.

Tests carried out
Tests as per LAPI Test Laboratory report No. 1652.4IM0150/10 issued on 6 December 2010 according to IMO Res. A.754(18) and RINA Test Laboratory Report No. 2015CS011654/1 issued on 23 November 2015 according to IMO FTP Code 2010 Part 3.




ATTACHMENT TO
CERTIFICATE No. MED493025CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****