1. Product Description
+ Marine Fiber Optic cables used in communication and equipment of ships and mobile offshore platforms.
Product Series | A type | Q type | QF Type |
Product Type Detail | AICI, AIOI, AFCI, AFOI | QICI, QIOI, QFCI, QFOI | QFAI |
Conductor | Tight Buffer Fiber | PTB loose-tubes (up to 12 or 24 fibers per tube) | PTB loose-tubes (up to 24 fibers) |
Loose Tube | - | 2.5±0.1 mm PBT (Polybutylene Terephthalate) or
3.5±0.1 mm PBT (Polybutylene Terephthalate) | 3.5±0.1 mm PBT (Polybutylene Terephthalate) |
Protection | Mica tapeAramid Yarn and Waterblocking glass yarns |
Fire resistant tape (optional) |
Inner sheath | SHF1 |
Armour (optional) | Galvanized steel wire or Tinned copper wire braid,Min.85% | Galvanized steel wire or Tinned copper wire braid Min.85% | Glass Yarn around the loose tube |
Outer sheath (optional) | SHF1 or SHF2 or SHF2 MUD |
Note: + Install at: -20℃ to 60℃ + Operate at: -40℃ to 90℃
+ Properties’ suffix:
SHF1: Low Smoke, Zero Halogen, Flame retardant
SHF2 : Low Smoke , Zero Halogen, Flame retardant, Oil resistance
SHF2-MUD : Low Smoke , Zero Halogen, Flame retardant, Mud resistance
A(First letter): Fiber, tight buffered
A(Third letter): Strength member of yarn
Q : Fiber in loose tube
F : Bedding/Inner covering or taping
I : Thermoplastic compound SHF 1
O: Tinned copper wire braid
C: Galvanized steel wire braid
TYPE APPROVAL CERTIFICATE |
No. ELE685924WS |
Enclosure - Page 2 of 2 |
A type, Q type, QF type |
2. Test standards:
+ IEC 60794-1-1-2015; IEC 60332-1-2-2015; IEC 60331-25-1999; IEC 60332-3-22-2018; IEC 60754-1-2019;
IEC 60754-2-2019; IEC 61034-1-2019; IEC 61034-2-2019. IEC 60092-360-2021; IEC 60331-2 (180min); EN 50200
Annex E.
3. Reference Documents:
+ Manufacturer instruction. Filed by RINA with drawing No.: SHEL-22906.
+ Additional test Report: "Shanghai National center of testing and inspection for electric cable and wire Co., Ltd."
Report No.: CT24-04919-1~5. Filed by RINA with drawing No. SHEL-22908.
+ Routine test Report signed by RINA Surveyor. Filed by RINA with drawing No.SHEL-22909.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-22907.
4. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
5. Renewal/Revision:
+ January 04, 2024: initial certification. Certificate No. ELE376623WS/004.
+ March 24, 2025: renewed with modification. New certificate No. ELE685924WS revokes previous certificate. |
|