Product Description
+ The H-100 Series is a Converter for Fan and Pump Drive Control using Frequency
Main features
+ Control Method : V/F control, Slip Compensation
+ Frequency setting power : Digital command 0.01 Hz, Analogue command 0.06 Hz (60 Hz Standard)
+ Overload Capacity : 0.75~90kW : Rated Current : 120% 1 min. / 110~500kW : Rated Current : 110% 1min.
+ IP degree : IP20(0.75~185kW), IP00(220~500kW)
+ Storage temperature : -20 ~ 65 C Deg.
+ Output Frequency : 0-400 Hz
+ Input Frequency: 3ph : 50~60 Hz / 1ph : 60 Hz
+ Frequency Setting : Analogue type : -10~10V, 0~10V, 0~20mA, Digital type : key pad, pulse train input
Model | Applied Motor(kW) | Rated Capacity(kVA) | Rated Output
Current(A)
3ph/1ph | Rated Input Current(A) | Output Voltage(V)
3ph |
H100 0008-2 | 0.75 | 1.9 | 5/2.9 | 4.9 | 200~240 |
H100 0015-2 | 1.5 | 3.0 | 8/4.4 | 8.4 |
H100 0022-2 | 2.2 | 4.5 | 12/6.4 | 12.9 |
H100 0037-2 | 3.7 | 6.1 | 16/8.4 | 17.5 |
H100 0055-2 | 5.5 | 8.4 | 22/11 | 23.7 |
H100 0075-2 | 7.5 | 11.4 | 30/16 | 32.7 |
H100 0110-2 | 11 | 16 | 42/23 | 46.4 |
H100 0150-2 | 15 | 21.3 | 56/30 | 62.3 |
H100 0185-2 | 18.5 | 26.3 | 69/37 | 77.2 |
H100 0008-4 | 0.75 | 1.9 | 2.5/1.6 | 2.4 | 380~480 |
H100 0015-4 | 1.5 | 3 | 4/2.4 | 4.2 |
H100 0022-4 | 2.2 | 4.5 | 6/3.5 | 6.5 |
H100 0037-4 | 3.7 | 6.1 | 8/4.6 | 8.7 |
H100 0055-4 | 5.5 | 9.1 | 12/6.8 | 12.2 |
H100 0075-4 | 7.5 | 12.2 | 16/9.2 | 17.5 |
H100 0110-4 | 11 | 18.3 | 24/14 | 26.5 |
H100 0150-4 | 15 | 23 | 30/17 | 33.4 |
H100 0185-4 | 18.5 | 29 | 38/22 | 42.5 |
H100 0220-4 | 22 | 34.3 | 45/26 | 50.7 |
H100 0300-4 | 30 | 46.5 | 61/36 | 69.1 |
H100 0370-4 | 37 | 57.1 | 75/39 | 69.3 |
H100 0450-4 | 45 | 69.4 | 91/47 | 84.6 |
H100 0550-4 | 55 | 82 | 107/55 | 100.1 |
H100 0750-4 | 75 | 108.2 | 142/73 | 133.6 |
H100 0900-4 | 90 | 128.8 | 169/86 | 160 |
H100 1100-4 | 110 | 170 | 223(3ph) | 215.1 | 380~500 |
H100 1320-4 | 132 | 201 | 264(3ph) | 254.6 |
H100 1600-4 | 160 | 248 | 325(3ph) | 315.3 |
H100 1850-4 | 185 | 282 | 370(3ph) | 358.9 |
H100 2200-4 | 220 | 329 | 432(3ph) | 419.1 |
H100 2500-4 | 250 | 367 | 481(3ph) | 469.3 |
H100 3150-4 | 315 | 467 | 613(3ph) | 598.1 |
H100 3550-4 | 355 | 520 | 683(3ph) | 666.4 |
H100 4000-4 | 400 | 587 | 770(3ph) | 751.3 |
H100 5000-4 | 500 | 733 | 962(3ph) | 938.6 |
* All convertors are to be installed inside enclosed panel.
Reference Documents
+ Technical Document: LS ELECTRIC's system Specification for Frequency Converter (Inverter-H100 Series) Ver1.0 in March, 2019
+ Test report: DT&C's Environment Test Reports: Ref. No. DRCREL1911-0859 dated 29/11/2019, EMC Test Report Ref. No. DREETC1911-0222 dated 28/11/2019, DRCREL1911-0867 dated 29/11/2019, DREETC1911-0223 dated 28/11/2019
+ Visual Inspection & Performance Test: LS ELECTRIC's Performance Test Report for renewal ref. no. LSEQA-RT-RINA-1 dated 17/12/2024 attended by RINA Surveyor.
+ Asbestos-Free Declaration (SOLAS II-1/reg.3-5) : LS ELECTRIC's official letter dated 15/05/2019
Note/Remark
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
+ Software Type Approval is not included in the scope of this certificate.
+ Location : general power distribution zone except bridge and deck zone |
|