MED119926CS!001ENGD- -  -  N- MI-B15 CEILING WITH ACCESSORIES - METALLIC WET UNIT -N- S- S- -09/03/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED119926CS/001- N-Mar 8, 20312370495
 
Form
  Marine Equipment(TO)
Certification N. MED119926CS/001 - (ENG)
Certificate date 09/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model or Denomin.
Items
MI-B15 CEILING WITH ACCESSORIES - METALLIC WET UNIT
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO MSC.1/Circ. 1581
Expire date 08/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED119926CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MI-B15 CEILING WITH ACCESSORIES - METALLIC WET UNIT
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
March 9, 2026
March 8, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED119926CS/001
Page 1 of 3

Product description,

Ceiling certified by RINA, on B-15 Class, with Certificate No. MED511525CS/057, that may be fitted with the following accessories:
  • steel box, having dimensions of 270x270x85 mm composed of a steel sheet, 1 mm thick, and two layers of mineral wool 15 mm thick each and having density of 220 kg/m3 named PAROC MARINE FIRE SLAB 220 (with glass veil) or ROCKWOOL SeaRox SL488. The mineral wool layers, fitted outside are glued together and to the steel sheets by means of 50 g/m2 of glue named PROTOPUR AE 150 or Sika Force - 7110. The box aperture, having diameter of 200 mm, is shaped by the ceiling steel sheet. The box steel sheet is fixed to the ceiling panel, on four sides, by means of screws for mineral wool named PAROC XSF 001.
  • steel box, having dimensions of 270x270x84 mm composed of a steel sheet, 1 mm thick, and two layers of mineral wool, 15 mm thick each and having density of 220 kg/m3 named PAROC MARINE FIRE SLAB 220 (with glass veil) or ROCKWOOL SeaRox SL488. The mineral wool layers, fitted outside, are glued together and to the steel sheets by means of 50 g/m2 of glue named PROTOPUR AE 150 or Sika Force - 7110. The box is inserted in a specific seat shaped by a steel sheet with bended edges, 1 mm thick, that, together with the ceiling sheet (to whom is glued by means PTOTOPUR AE 150 adhesive or or Sika Force - 7110), shape the box aperture hole having diameter of 200 mm.
  • duct having external diameter of 157 mm and internal diameter of 125 mm (Fincantieri Code FC NE 841211 A), completed with an elbow pipe (Fincantieri Code FC NE 841225 A), both composed of two spiral sheets, 0.5 mm thick each and, inside, a mineral wool layer having thickness of 15 mm and density of 45 kg/m3. The elbow pipe is fixed to the duct and to the ceiling sheet by means of self-screwing screws 4.2x13 mm and is fitted with an air diffuser with fixing socket having diameter of 125 mm (Fincantieri Code FC NE 846464). The duct is suspended to the above deck by means of a steel clamps having thickness of 3 mm (Fincantieri Code FC NI 841161) fixed, with M8 screws, to an L shaped profile, 3 mm thick, having dimensions of 30x30 mm.
  • steel sheet thickness 1 mm dimensions 330x330x117 mm, internally insulated by two layers of mineral wool named Rockwool Searox SL488 thickness 15 mm and density 220 kg/m³. Between steel sheet, first insulation layer and second insulation layer was applied 50 gr/m² of glue named Sika Force – 7110. The opening on the B class ceiling panel has a diameter of 200mm;
  • steel sheet thickness 1 mm dimensions 332x332x116 mm, internally insulated by two layers of mineral wool named Rockwool Searox SL488 thickness 15 mm and density 220 kg/m³. The steel sheet is secured on the mineral wool of the B class ceiling panel by no. 4 screws type PAROC XFS 001. Between steel sheet, first insulation layer and second insulation layer was applied 50 gr/m² of glue named Sika Force – 7110. The opening on the B class ceiling panel has a diameter of 200 mm;




 



ATTACHMENT TO
CERTIFICATE Nr. MED119926CS/001
Page 2 of 3
  • On longitudinal joint of the ceiling may be equipped with a joint cover by a duct 70 mm high, 600 mm wide of 1 mm thick sheet metal, externally insulated with a layer of 15 mm thick Rockwool SeaRox SL488 mineral wool with a density of 220 kg/m3, glued with 50 g/m2 of Sika Force-110. This duct is fixed to the joints using 2 “S” shaped metal brackets 152.5 x 60.5 x 62 mm with a thickness of 1.5 mm, fixed to the ceiling with 2 self-drilling screws on the joints and to the duct with 4 wool screws, 2 on the side and 2 on the top.

Field of application
Fire resisting B-15 Class ceiling with accessories; fire hazard on the side fitted with the steel sheet.
Reference documents
Marine Interiors Cabins SpA drawing No. 24PC00437.00 Rev. 01, dated 10 October 2022, no. +24PC00475 dated 15 April 2024, no +24PC00492 dated 31/07/2024 and no. +24PC00572 rev.01 dated 08/01/2026.
Tests carried out
Tests as per RINA Test Laboratory report No. 2022CS012579/2 issued on 10 October 2022, No. 2024CS01208/10 dated 28 June 2024, No. 2024CS012568/2 dated 06 November 2024, No. 2026CS011199/1 dated 20/02/2026 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED119926CS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****