MED011123CS!003ENGF- -  -  N- EMG Leather -N- S- S- -03/05/2023- Marine Equipment- - SN- S- - N-  - 375,096B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED011123CS/003- N-May 2, 2028375096
 
Form
  Marine Equipment(TO)
Certification N. MED011123CS/003 - (ENG)
Certificate date 03/05/2023
Type Protezione antincendio
Product Upholstered furniture: (b) cover material for any filling material
Item Nº MED/3.20b

Model or Denomin.
Items
EMG Leather
Applicant FOGLIZZO LEATHER SRL
Place of requester Via Forli, 164  %  10149 Torino (TO)  % ITALY
Tel. N.,Fax, Email 011 5818728, 011 4512109, ---
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 23/01/2023
Expire date 02/05/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED011123CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.20b
Description Upholstered furniture: (b) cover material for any filling material
Type EMG Leather
Applicant FOGLIZZO LEATHER SRL
Via Forli, 164,10149 Torino (TO),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 3, 2023
May 2, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED011123CS/003
Page 1 of 2

Product description



Upholstered composite made of cover composed of 100% soft suede leather with polyamid surface coating produced by Foglizzo Leather srl (TO) and any flame or non-flame retardant filling.

Mass per area of cover (g/m2): 1200 - 1400
Thickness of cover (mm): 1,4 -1,6


Field of application

As upholstered furniture.


Tests carried out

Tests as per RINA Test Laboratory report No. 2013CS011255 dated 29 April 2013 according to IMO 2010 FTP code, annex 1. Part 8.




ATTACHMENT TO
CERTIFICATE No. MED011123CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****