MED320426CS!002ENGF- -  -  N- Fire Doors - A60PRO2A -N- S- S- -22/07/2026- Marine Equipment- - SN- S- - N-  - 1,047,638B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED320426CS/002- N-Jul 21, 20311047638
 
Form
  Marine Equipment(TO)
Certification N. MED320426CS/002 - (ENG)
Certificate date 22/07/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
Fire Doors - A60PRO2A
Applicant S.I.N. SERVICE SRL
Place of requester VIA DEL PESCATORE 3  %  80053 CASTELLAMMARE DI STABIA (NA)  % ITALY
Tel. N.,Fax, Email 081 8018602, 081 8727940, ---
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ. 1319
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1511/Rev.1
Request 28/05/2026
Expire date 21/07/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED320426CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type Fire Doors - A60PRO2A
Applicant S.I.N. SERVICE SRL
VIA DEL PESCATORE 3,80053 CASTELLAMMARE DI STABIA (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ. 1319
Reference standards SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1511/Rev.1
Issued in Genoa on
This Certificate is valid until
July 22, 2026
July 21, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED320426CS/002
Page 1 of 2

Product description

Double leaf hinged door whose maximum clear opening size is 2240 mm wide and 2101 mm high. The door leaves, having, each maximum width of 1134 mm and maximum height of 2111 mm, are composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material composed of a layer of material named PROMASIL MARINE, 60 mm thick and having density of 285 kg/m3. The insulating material is glued to the steel sheets by means of 500 g/m2 of adhesive type PROMACOL MARINE. The leaves are fitted with a closure system, actuated by the handle and fitted with two sliding bars having diameter of 10 mm, that acts on three points (primary leaf) and two points (secondary leaf). The door frame is composed of an U shaped steel profile, 5 mm thick, fitted with internal transversal stiffeners, fillet welded to the bulkhead and insulated with one layer, having thickness of 60 mm of mineral wool type Rockwool Searox SL660 (certified non combustible in conformity to the requirements of the IMO FTP Code), having density of 150 kg/m3.
Field of application
Fire resistant A-60 Class double leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.

In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows
- maximum door size tested
- door used with a fire tested frame design
Reference documents
S.I.N. SERVICE Srl drawing No. A60PRO2A dated 16 June 2016 approved on 19 July 2016 with endorsement No. LABS-1317.
Tests carried out
Test as per RINA Test Laboratory Report No. 2016CS012008/1 issued on 27 July 2016 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED320426CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****