MED511525CS!063ENGD- -  -  N- MI W B15 -N- S- S- -12/05/2026- Marine Equipment- - NN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/063- N-Mar 1, 20312370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/063 - (ENG)
Certificate date 12/05/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items/Sizes
MI W B15
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO Circ. MSC.1 1581,SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9
Validity date 01/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/063

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MI W B15
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO Circ. MSC.1 1581; SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
May 12, 2026
March 1, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/063
Page 1 of 2

Product description

Bulkhead having maximum height of 2400 mm consisting of panels having maximum width of 900 mm. Such panels are composed of a mineral wool layer with glass veil type ISOVERD Ultimate U SeaProtect slab 100 V1 (certified non combustible in conformity to the requirements of the IMO FTP Code), 25 mm thick and having density of 100 kg/m3 glued to the steel sheets by means of 140 g/m2 of adhesive type SIKAFORCE 110 or PROTOPUR AE 100. The panel joints consists of L shaped sheet bent edges, relevant locking and fixing by means of screws fitted with pitch of 350 mm. The joints are covered with an omega shaped profile, 1 mm thick and having dimensions of 62x11 mm fixed by means of screws and insulated with ceramic fiber type Firemaster Marine Plus Blanket (certified non combustible in conformity to the requirements of the IMO FTP Code) having thickness of 19 mm and density of 96 kg/m3. The panels are fitted with T shaped steel stiffeners having dimensions of 12x30 mm and thickness of 1.2 and 2.4 mm composed of a steel sheet 1.2 mm thick. The stiffeners are glued to the steel sheets by means of 150 g/m2 of glue named EXTRABOND NO FIRE, with maximum pitch of 600 mm (panels having maximum width of 600 mm) or maximum pitch of 400 mm (panel having width greater than 600 mm up to 900 mm). The panels are fixed, on the perimeter, to U shaped steel profiles, 2 mm thick and having dimensions of 50x35 mm, by means of screws fitted with pitch of 200 mm.
Field of application
Fire resisting B-15 Class bulkhead for general applications.
Reference documents
MARINE INTERIORS CABINS drawings No. 24PC00343 Rev. 01 and No. 24PC00383 dated 2 December 2020 approved on 1 March 2021 respectively with endorsement No. LABS-2182 and No. LABS-2184.
Tests carried out

Tests as per RINA Test Laboratory reports No. 2014CS013600/2 dated 22 January 2015, No. 2016CS011304/8 dated 12 January 2017 and No. 2021CS0150/3 dated 2 March 2021 issued according to APPENDIX 1 of IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/063
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****