|
 |
ATTACHMENT TO
|
CERTIFICATE No. MED455026WS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verified components of the equipment (with serial
number) |
|
|
|
| S/N.: E2312142_CMYZ0150; Intend for M/T: TIGER FISHER, IMO Number:1048267 |
|
|
|
|
|
|
|
| Technical documentation |
|
|
|
Product description: The equipment is intended for installation onboard ship for the purpose of producing inert gas: - Product module: PSA MN1500 - Capacity: 1500m3/h@95%; - Operating/Max Working Pressure: 7bar/10bar Type Examination document: Following documents have been approved in compliance with SOLAS 74 Reg.II-2/4, IMO Res. A.567(14), IMO Res. MSC.98 (73) - (FSS Code)15, IMO MSC/Circ. 353, IMO MSC/Circ. 485, IMO MSC/Circ. 731 and IMO MSC/Circ. 1120: - SHMC-43568: whole system block diagram and PID - CMYZ0148~153 - SHMC-43564: LCP MN2 service diagram GA02_Rev008 - 9829226133_01 - SHMC-43565: Alarm and output list v.6 - SHMC-43566: Atlas Copco Site Acceptance Test procedure for alarm and capacity_Rev00 - SHMC-43569: M2 LCP Test Procedure and report template_1.9 -EN-final - SHMC-43571: MN M2 Functional description Marine control system Rev02 - SHMC-43570: MN LCP Software Quality Plan include change handling procedure Rev1 - SHMC-43572: MN Marine Nitrogen Instruction Book_9829226121 - SHMC-43573: MN internal leakage and function test report template - SHMC-43574: Nitrogen generator system technical description - SHMC-44340: ASBESTOS-FREE DECLARATION_CT Wuxi Campus - SHMC-44341: MN D-FMEA Testing carried out:Type testing has been carried out, witnessed by RINA on 08/04/2026 as per IMO MSC/Circ. 353, and relevant testing report and document reviewed are as below: - Review Pressure test report for piping system, - Reviewed Oxygen analyser calibration report. - witnessed Commissioning test
Marking of product and conformity: For traceability, each unit is to be marking with: - Manufacturer’s name or trace mark: Atlas Copco (Wuxi) Compressor Co., Ltd. - Type: PSA MN1500 - Serial No. E2312142_CMYZ0150 - Mark of conformity: 0474/2026 (wheel mark)
|
Limitation on the acceptance or use of the
product
____________________________ |
|
|
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA |
|
|
|