MED118822CSENGD- -  -  N- B15DSB2/B2A -N- S- S- -13/04/2023- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED118822CS- N-Apr 12, 2028597421
 
Form
  Marine Equipment(TO)
Certification N. MED118822CS - (ENG)
Certificate date 13/04/2023
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
B15DSB2/B2A
Applicant BLU BUD SRL
Place of requester VIA FIESCHI 20/9  %  16121 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2022/1157
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 23/03/2022
Validity 12/04/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED118822CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15DSB2/B2A
Applicant BLU BUD
VIA CORSICA 21/20,16121 GENOVA (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 13, 2023
April 12, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED118822CS
Page 1 of 2

Product description



Double leaf sliding door with clear light of 2200x2200 mm (WxH). The leaves, having, each, dimensions of 1159x2259 mm (WxH) are composed of two steel sheets, 1 mm thick each and, in between, a layer of mineral wool type ROCKWOOL SEAROX SL 440 having density of 150 kg/m3 and thickness of 35 mm and a layer of calcium silicate type PROMATECT H having density of 870 kg/m3 and thickness of 6 mm. The door frame is composed of C steel profile, 1.5 mm thick fixed to bulkhead by means of screws 4.2x25 and pitch of 150 mm and coupled to an L profile 2 mm thick. On the upper side is fixed to the bulkhead, by means of screws 4.2x25 and pitch of 717 mm, a steel profile 1.5 mm thick to whom an L steel support profile and the suspension trolley are fixed, while on the lower side the sill is composed of hollow steel profile having dimensions of 90x25 mm and thickness of 1.5 mm. The door is equipped by closure dogs CHEMOLLI FIREBOLTS type A2; two on lower central side that acts on the sill and two on the rabbet between leaves, while the lock type is VINGCARD No.5382.
Field of application
Fire resistant B-15 Class double leaf sliding door for general application.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
BLU BUD drawing No. 22019A700 Rev. 5 dated 13 April 2023 enclosed to RINA Test Report No.2022CS011188/1.
BLU BUD drawing No. 22019A235 Rev. 5 dated 13 April 2023 enclosed to RINA Test Report No.2022CS011188/2.

Tests carried out
Test as per Laboratory RINA Test Reports No.2022CS011188/1 and No.2022CS011188/2 issued on 13 April 2023 according to Part 3 of IMO 2010 FTPC.




ATTACHMENT TO
CERTIFICATE No. MED118822CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****