Single leaf hinged door whose maximum clear opening size is 2106 mm high and 1036 mm wide. The door leaf, having maximum dimensions of 1060x2130 mm (WxH), is composed of two steel sheets, 1.25 mm thick each and, in between, the insulating material composed of a layer of mineral wool named FIBRANGEO MARINE S, 50 mm thick and having density of 100 kg/m3. The leaf is fitted with two stiffeners made of steel profiles having dimensions of 25x46x25 mm and thickness of 1.5 mm. The door may be fitted with a window having maximum dimensions of 430x530 mm, composed of a glass type Pyrobelite 12, 12.5 mm thick. The window’s frame composed of steel profiles 1 mm thick, is completed with strips of Isofrax 1260 °C having dimensions of 8x2 mm. The door is fitted with a locking system with lock type BMH DIN18250, a handle type Hoppe Paris and three steel hinges made by Caretta. The door frame, composed of steel profiles having thickness of 3 mm, is fixed to the bulkhead by means of screws M8x25 mm with pitch of 200 mm. The door frame is fitted with plasticized seal in PVC type Armavyl E72-501-UV.
Field of application
Fire resistant A-0 Class single leaf hinged door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents
A. Papadopoulos & co G.P. drawing No. HSR-A0-120 Rev. A dated 08/05/2017 approved with endorsement No. LABS-1518 on 4 August 2017.
Tests carried out
Test as per RINA Test Laboratory report No. 2017CS011411 issued on 4 August 2017 according to IMO 2010 FTP Code Part 3. |