FAB032024MIENG- -  -  N- Finish Machined Flanges,Rough Machined and Finish Machined Forgings,Rough Machined and Finish Machined Hot Rolled Rings. -N- S- S- -20/05/2024- Fabbricanti Approvati- - NN- N- Michele Fusco- S-  - 199,263Michele FuscoBbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB032024MI- N-May 14, 2029199263
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB032024MI - (ENG)
Certificate date 20/05/2024
Type Approvazione di fabbricanti di materiali
Product Flange e Forgiati

Model or Denomin.
Items
Finish Machined Flanges,Rough Machined and Finish Machined Forgings,Rough Machined and Finish Machined Hot Rolled Rings.
Applicant OFFICINE AMBROGIO MELESI & C SRL
Place of requester LARGO DE VECCHI, 11  %  23813 Cortenova (LC)  % ITALY
Tel. N.,Fax, Email +39 34198341, 0341983496, lino.uberti@melesi.it
Standards RINA Rules for the approval of manufacturers of materials
Expire date 14/05/2029
Responsible Office RINA Milan Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB032024MI
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Standard Flanges and Miscellaneous Forgings
Type Finish Machined Flanges
Rough Machined and Finish Machined Forgings
Rough Machined and Finish Machined Hot Rolled Rings.

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until May 14, 2029
_________________________________
RINA Services S.p.A.
Michele Fusco
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB032024MI
Enclosure - Page 1 of 1
Finish Machined Flanges,Rough Machined and Finish Machined Forgings,Rough Machined and Finish machined Hot Rolled Rings.

APPROVAL CONDITIONS


Production Capacity Declared by Manufacturer:
Finish Machined Flanges : size up to 120" nps;
Rough Machined and Finish Machined Forgings : 5000 kgs
Rough Machined and Finish Machined Hot Rolled Rings : 5000 kgs

Steel Types:
C/Mn Steel; Low Alloy; C/Mn Steel for Low Temperature Services; Stainless Steel; Nichel ALloy, Copper Alloy and Titanium.

Process: Open Die; Close Die; Ring Rolling.

Heat Treatment: Normalizing; Quanching and Tempering; Annealed Solution.

Final Machining: as per Standard and/or Client Requirements.

Survey Condition:
all forgings to be used for construction of ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.








General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Milan Marine May 20, 2024
**** NOTICE: This is NOT an official certificate ****